Edelbrock

Edelbrock Performance Parts — American Muscle, Proven Results

Edelbrock has been at the center of American performance engineering since 1938. From the original Slingshot intake to the modern E-Force supercharger, every product in the Edelbrock catalog is built around one principle: measurable power gains you can feel on the street and verify on the dyno. This collection covers the full Edelbrock lineup — intake manifolds, cylinder heads, carburetors, distributors, water pumps, engine kits, and more.

Intake Manifolds & Airflow Engineering

Edelbrock's intake manifold lineup is one of the most comprehensive in the industry, spanning carbureted and EFI applications across virtually every popular V8 platform. The Performer series delivers strong street manners with improved idle quality and low-to-mid RPM torque. The RPM Air-Gap design steps up for higher-RPM builds where plenum heat soak is a concern. Victor and Super Victor manifolds are purpose-built for race applications where top-end airflow is the priority.

Each manifold is cast and machined in the USA to tight port-matching tolerances, ensuring consistent airflow distribution across all cylinders without the fitment headaches common with offshore castings.

Cylinder Heads

Edelbrock cylinder heads are available for Small Block Chevy, Big Block Chevy, Small Block Ford, Ford FE, and LS platforms. Performer, Performer RPM, and Victor series heads are CNC-ported to specific flow targets, with combustion chamber volumes and compression ratios matched to common street and race build specs. Pair them with a matching Edelbrock intake for a top-end combination that's engineered to work together — not just bolted together.

Carburetors & Fuel Delivery

The Edelbrock Performer carburetor series remains one of the most popular bolt-on upgrades for classic V8 builds. Available in 500, 600, 650, 700, 750, and 800 CFM configurations, these carbs are pre-calibrated for street use and require minimal tuning out of the box. Metering rods, jets, and calibration kits are stocked separately for builders who want to dial in fuel delivery for specific cam profiles or altitude conditions.

Common Applications

Edelbrock components are engineered for Small Block and Big Block Chevy, GM LS, Small Block and Big Block Ford, Ford 429/460, and Chrysler/Mopar V8 platforms. Applications range from classic muscle car restorations and street rods to modern restomod builds, dedicated drag cars, and high-output truck engines. Whether you're refreshing a numbers-matching engine or building a stroker from scratch, Edelbrock has a combination that fits.

Quality & USA Manufacturing

Edelbrock designs and manufactures its core product lines in the United States, maintaining direct control over casting quality, CNC machining tolerances, and final assembly. That domestic manufacturing standard translates to consistent fitment, reliable gasket surfaces, and parts that work as advertised without modification on the vast majority of applications.

Installation Notes

Most Edelbrock intake and head combinations are bolt-on with matching gaskets and hardware. Cylinder head swaps may require checking valve-to-piston clearance depending on cam lift and compression ratio. Carburetor installations are straightforward on most applications but benefit from a baseline tune after installation — especially when paired with a new cam or head combination. Edelbrock provides detailed installation instructions and tech support for all products.

Shop Edelbrock at Ozkonic Kustomz

Browse the full Edelbrock catalog below. If you need help selecting the right intake, head, or carb combination for your engine build, reach out — we'll help you put together a package that makes power and fits your budget.

Showing 1014 of 1014 products
Filter Products

Filter Products

Showing 1014 of 1014 products

Clear
  • 009665_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Push Rod Guide Plate - Bdvj_9665
    $49.95 USD
    $49.95 USD
    $49.95 USD
    Edelbrock Engine Push Rod Guide Plate - Bdvj_9665 Edelbrock Engine Push Rod Guide Plate - Bdvj_9665 is selected for builders who want dependable fit, clean installation, and performance-focused re...
  • 009643_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Exhaust Valve - Bdvj_9643
    $200.95 USD
    $200.95 USD
    $200.95 USD
    Edelbrock Engine Exhaust Valve - Bdvj_9643 Edelbrock Engine Exhaust Valve - Bdvj_9643 is selected for builders who want dependable fit, clean installation, and performance-focused results. This li...
  • 009640_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Intake Valve - Bdvj_9640
    $36.95 USD
    $36.95 USD
    $36.95 USD
    Edelbrock Engine Intake Valve - Bdvj_9640 Edelbrock Engine Intake Valve - Bdvj_9640 is selected for builders who want dependable fit, clean installation, and performance-focused results. This list...
  • 009641_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Intake Valve - Bdvj_9641
    $219.95 USD
    $219.95 USD
    $219.95 USD
    Edelbrock Engine Intake Valve - Bdvj_9641 Edelbrock Engine Intake Valve - Bdvj_9641 is selected for builders who want dependable fit, clean installation, and performance-focused results. This list...
  • 009632_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Pushrod - Bdvj_9632
    $233.95 USD
    $233.95 USD
    $233.95 USD
    Edelbrock Engine Pushrod - Bdvj_9632 Edelbrock Engine Pushrod - Bdvj_9632 is selected for builders who want dependable fit, clean installation, and performance-focused results. This listing is opt...
  • 009611_v1.jpg
    Sale
    Add to wishlist
    Edelbrock
    Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9611
    $40.95 USD
    $82.99 USD
    $40.95 USD
    Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9611 Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9611 is selected for builders who want dependable fit, clean installation, and perfor...
  • 009609_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Push Rod Guide Plate - Bdvj_9609
    $106.95 USD
    $106.95 USD
    $106.95 USD
    Edelbrock Engine Push Rod Guide Plate - Bdvj_9609 Edelbrock Engine Push Rod Guide Plate - Bdvj_9609 is selected for builders who want dependable fit, clean installation, and performance-focused re...
  • 009615_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9615
    $86.95 USD
    $86.95 USD
    $86.95 USD
    Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9615 Edelbrock Engine Valve Spring Retainer Keeper - Bdvj_9615 is selected for builders who want dependable fit, clean installation, and perfor...
  • 009629_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Pushrod - Bdvj_9629
    $207.95 USD
    $207.95 USD
    $207.95 USD
    Edelbrock Engine Pushrod - Bdvj_9629 Edelbrock Engine Pushrod - Bdvj_9629 is selected for builders who want dependable fit, clean installation, and performance-focused results. This listing is opt...
  • 009290_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Epoxy - Bdvj_9290
    $50.95 USD
    $50.95 USD
    $50.95 USD
    Edelbrock Epoxy - Bdvj_9290 Edelbrock Epoxy - Bdvj_9290 is selected for builders who want dependable fit, clean installation, and performance-focused results. This listing is optimized for quick p...
  • 009266_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Carburetor Heat Insulator - Bdvj_9266
    $32.95 USD
    $32.95 USD
    $32.95 USD
    Edelbrock Carburetor Heat Insulator - Bdvj_9266 Edelbrock Carburetor Heat Insulator - Bdvj_9266 is selected for builders who want dependable fit, clean installation, and performance-focused result...
  • 093774_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Intake Valve - Bdvj_93774
    $47.95 USD
    $47.95 USD
    $47.95 USD
    Edelbrock Engine Intake Valve - Bdvj_93774 Edelbrock Engine Intake Valve - Bdvj_93774 is selected for builders who want dependable fit, clean installation, and performance-focused results. This li...
  • 009367_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Exhaust Valve - Bdvj_9367
    $35.95 USD
    $35.95 USD
    $35.95 USD
    Edelbrock Engine Exhaust Valve - Bdvj_9367 Edelbrock Engine Exhaust Valve - Bdvj_9367 is selected for builders who want dependable fit, clean installation, and performance-focused results. This li...
  • 093776_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Engine Exhaust Valve - Bdvj_93776
    $36.95 USD
    $36.95 USD
    $36.95 USD
    Edelbrock Engine Exhaust Valve - Bdvj_93776 Edelbrock Engine Exhaust Valve - Bdvj_93776 is selected for builders who want dependable fit, clean installation, and performance-focused results. This ...
  • 009267_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Carburetor Heat Insulator - Bdvj_9267
    $45.95 USD
    $45.95 USD
    $45.95 USD
    Edelbrock Carburetor Heat Insulator - Bdvj_9267 Edelbrock Carburetor Heat Insulator - Bdvj_9267 is selected for builders who want dependable fit, clean installation, and performance-focused result...
  • 009265_v1.jpg
    Add to wishlist
    Edelbrock
    Edelbrock Carburetor Heat Insulator - Bdvj_9265
    $34.95 USD
    $34.95 USD
    $34.95 USD
    Edelbrock Carburetor Heat Insulator - Bdvj_9265 Edelbrock Carburetor Heat Insulator - Bdvj_9265 is selected for builders who want dependable fit, clean installation, and performance-focused result...

Showing 193 -208 of 1014 items