{"title":"Timbren","description":"\u003ch2\u003eTimbren — Suspension Enhancement Systems for Trucks, SUVs \u0026amp; Tow Vehicles\u003c\/h2\u003e\u003cp\u003eTimbren has been engineering rubber suspension enhancement products since 1968, developing a unique approach to load support and suspension improvement that uses engineered rubber helper springs rather than air bags or additional steel springs. Timbren's Suspension Enhancement Systems (SES) and Active Off-Road Jounce Systems (AORS) install in the existing jounce bumper location on most trucks and SUVs, providing progressive load support that eliminates sag under heavy loads, improves towing and hauling stability, and maintains correct ride height without the maintenance requirements of air bag suspension systems.\u003c\/p\u003e\u003ch3\u003eSuspension Enhancement Systems (SES)\u003c\/h3\u003e\u003cp\u003eTimbren SES kits replace the factory rubber jounce bumper with a progressive-rate rubber helper spring that engages progressively as the suspension compresses under load. At normal unloaded ride height, the Timbren unit does not contact the axle or suspension component — providing no change to the unloaded ride quality. As load is added and the suspension compresses, the Timbren unit begins to engage, providing increasing support that prevents the suspension from bottoming out and maintains correct ride height under maximum load.\u003c\/p\u003e\u003cp\u003eThis progressive engagement characteristic is the key advantage of the Timbren system over fixed-rate helper springs and air bags — the ride quality at light loads is unchanged from stock, while the load support at maximum payload and towing capacity is significantly improved. No air lines, compressors, or electrical components are required, and the rubber construction requires no maintenance over the life of the product.\u003c\/p\u003e\u003ch3\u003eActive Off-Road Jounce Systems (AORS)\u003c\/h3\u003e\u003cp\u003eTimbren's AORS is engineered specifically for off-road applications where suspension articulation is as important as load support. The AORS uses a hollow rubber spring design that provides load support under compression while allowing greater suspension travel than a solid rubber helper spring — maintaining the articulation capability needed for off-road use without sacrificing the load support benefits of the Timbren system. The AORS is the correct choice for lifted trucks and Jeeps that see both off-road use and heavy towing or hauling duty.\u003c\/p\u003e\u003ch3\u003eTowing \u0026amp; Hauling Applications\u003c\/h3\u003e\u003cp\u003eTimbren SES kits are one of the most popular upgrades for trucks and SUVs used for regular towing and hauling. Factory suspension on most trucks is designed for a compromise between unloaded ride quality and loaded stability — a compromise that results in excessive sag, reduced steering control, and degraded braking performance when the vehicle is loaded to or near its rated capacity. Timbren SES kits address the loaded side of this compromise without affecting the unloaded ride, providing a practical improvement in towing and hauling capability without the cost and complexity of a full suspension upgrade.\u003c\/p\u003e\u003ch3\u003eCommon Applications\u003c\/h3\u003e\u003cp\u003eTimbren SES and AORS kits cover Ford F-150, F-250, and F-350, Chevrolet Silverado and Colorado, GMC Sierra and Canyon, Ram 1500, 2500, and 3500, Toyota Tacoma and Tundra, Jeep Wrangler and Gladiator, and a range of additional domestic and import truck and SUV platforms. Front and rear kits are available depending on the application and the load distribution of the specific towing or hauling use case.\u003c\/p\u003e\u003ch3\u003eBuild Quality \u0026amp; No-Maintenance Design\u003c\/h3\u003e\u003cp\u003eTimbren rubber helper springs are manufactured from engineered rubber compounds formulated for long-term resistance to compression set, UV degradation, and the temperature cycling of outdoor vehicle use. The rubber construction requires no inflation, no adjustment, and no maintenance over the service life of the product — a significant advantage over air bag systems that require periodic pressure checks, compressor maintenance, and occasional air line and fitting replacement. Timbren products are backed by a lifetime warranty against defects in materials and workmanship.\u003c\/p\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eTimbren SES installations are straightforward bolt-in replacements for the factory jounce bumper on most applications, requiring only basic hand tools and 30–60 minutes of installation time. No drilling, cutting, or modification of the factory suspension is required on supported platforms. The Timbren unit installs in the factory jounce bumper location using the existing mounting hardware on most applications. Verify the correct kit for your specific year, make, model, and suspension configuration before ordering — front and rear kits are different, and coil spring and leaf spring applications use different Timbren designs.\u003c\/p\u003e\u003ch3\u003eShop Timbren at Ozkonic Kustomz\u003c\/h3\u003e\u003cp\u003eBrowse the full Timbren lineup below — SES kits for trucks and SUVs, AORS kits for off-road applications, and front and rear configurations for the most popular domestic and import platforms. If you need help selecting the right Timbren kit for your vehicle and load requirements, reach out. Timbren has been solving truck suspension sag since 1968 — we'll help you find the right system for your application.\u003c\/p\u003e","products":[{"product_id":"timbren-ses-kit-rear-gm-suburban-yukon-denali","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRG35","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRG35 is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 3600 lb Capacity - GM Fullsize Van 1975-2012 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRG35\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 8.61 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1975-2023 Chevrolet, GMC Express 2500, Express 3500, G30, G35, G3500, Savana 2500+ applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888458772732,"sku":"FDCP_GMRG35","price":398.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRG35.jpg?v=1774475724"},{"product_id":"timbren-ses-kit-rear-gm-1-2-3-4-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25S","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25S is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - GM Fullsize Truck 1999-2010 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRCK25S\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.10 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1999-2010 Chevrolet, GMC Sierra 1500, Sierra 1500 Classic, Sierra 1500 Hd, Sierra 1500 Hd Classic, Sierra 2500, Sierra 2500 Hd+ applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888458936572,"sku":"FDCP_GMRCK25S","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRCK25S.jpg?v=1774475732"},{"product_id":"timbren-ses-kit-rear-gm-1-2-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK15S","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK15S is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - GM Fullsize Truck 1999-2012 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRCK15S\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 5.45 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1999-2019 Chevrolet, GMC Sierra 1500, Sierra 1500 Classic, Sierra 1500 Limited, Silverado 1500, Silverado 1500 Classic, Silverado 1500 Ld applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888459067644,"sku":"FDCP_GMRCK15S","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRCK15S.jpg?v=1774475740"},{"product_id":"timbren-ses-kit-rear-gm-3-4-1-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25D","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25D is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - GM Fullsize Truck 2011-23 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRCK25D\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 5.95 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2011-2026 Chevrolet, GMC Sierra 2500 Hd, Sierra 3500 Hd, Silverado 2500 Hd, Silverado 3500 Hd applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888459231484,"sku":"FDCP_GMRCK25D","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRCK25D.jpg?v=1774475748"},{"product_id":"suspension-enhancement-s-ystem","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR1504E","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR1504E is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - Ford Fullsize Truck 2015-20 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR1504E\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 12.65 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2015-2026 Ford F 150 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888459329788,"sku":"FDCP_FR1504E","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR1504E.jpg?v=1774475755"},{"product_id":"timbren-ses-kit-rear-ford-1-2-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR150D","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR150D is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - Ford Fullsize Truck 2004-08 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR150D\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 7.55 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2004-2008 Ford, Lincoln F 150, Mark Lt applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888459690236,"sku":"FDCP_FR150D","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR150D.jpg?v=1774475771"},{"product_id":"timbren-ses-kit-rear-ford-3-4-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDJ","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDJ is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - Ford Fullsize Truck 2017 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR250SDJ\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.01 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2017-2026 Ford F 250 Super Duty applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888460214524,"sku":"FDCP_FR250SDJ","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR250SDJ.jpg?v=1774475786"},{"product_id":"timbre-ses-kit-rear-14-dodge-ram-2500","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR2500D","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR2500D is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - Dodge Ram Fullsize Truck 2014-19 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: DR2500D\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.22 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2014-2026 Ram 2500 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888460542204,"sku":"FDCP_DR2500D","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMDR2500D.jpg?v=1774475793"},{"product_id":"timbren-ses-kit-rear-ford-4x4-1-2-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR1504D","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR1504D is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - Ford Fullsize Truck 2009-12 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR1504D\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.91 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2009-2014 Ford F 150 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888460640508,"sku":"FDCP_FR1504D","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR1504D.jpg?v=1774475801"},{"product_id":"timbren-ses-kit-rear-gm-suvs","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRYS4","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRYS4 is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - GM Fullsize SUV 2000-12 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRYS4\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 2.00 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2000-2020 Cadillac, Chevrolet, GMC Avalanche, Escalade, Escalade Ext, Suburban, Suburban 1500, Tahoe+ applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888460738812,"sku":"FDCP_GMRYS4","price":269.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRYS4.jpg?v=1774475808"},{"product_id":"timbren-ses-kit-front-ford-1-ton-05-20","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FF350SDC","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FF350SDC is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Front - Hardware Included - Rubber - Black - 3000 lb Capacity - Ford Fullsize Truck 2005-20 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FF350SDC\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 7.30 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2005-2026 Ford F 250 Super Duty, F 350 Super Duty applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461230332,"sku":"FDCP_FF350SDC","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFF350SDC.jpg?v=1774475822"},{"product_id":"timbren-ses-kit-front-gm-3-4-1-ton-99-10","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK25S","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK25S is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Front - Hardware Included - Rubber - Black - 14000 lb Capacity - GM Fullsize SUV \/ Truck 2011-21 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMFK25S\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 2.25 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1996-2021 Cadillac, Chevrolet, GMC, Hummer+ Avalanche 2500, Escalade, H2, K2500, K3500, Montero+ applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461328636,"sku":"FDCP_GMFK25S","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMFK25S.jpg?v=1774475830"},{"product_id":"timbren-ses-kit-front-gm-1-ton-2011","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK25D","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK25D is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Front - Hardware Included - Rubber - Black - 8000 lb Capacity - GM Fullsize Truck 2011-20 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMFK25D\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 3.95 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2011-2026 Chevrolet, GMC Sierra 2500 Hd, Sierra 3500 Hd, Silverado 2500 Hd, Silverado 3500 Hd, Silverado 4500 Hd applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461525244,"sku":"FDCP_GMFK25D","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMFK25D.jpg?v=1774475844"},{"product_id":"timbren-ses-kit-front-ford-1-2-ton-04-14","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FF150F","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FF150F is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Front - Hardware Included - Rubber - Black - 14000 lb Capacity - Ford Fullsize Truck 2004-14 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FF150F\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.60 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2004-2014 Ford F 150 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461754620,"sku":"FDCP_FF150F","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFF150F.jpg?v=1774475858"},{"product_id":"timbren-ses-kit-rear-16-toyota-tacoma","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTTNL","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTTNL is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 5000 lb Capacity - Toyota Midsize Truck 2016-23 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: TORTTNL\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 6.45 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2006-2023 Toyota Tacoma applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461885692,"sku":"FDCP_TORTTNL","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMTORTTNL.jpg?v=1774475865"},{"product_id":"timbren-ses-kit-rear-00-toyota-tundra","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTTN","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTTN is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 7000 lb Capacity - Toyota Midsize Truck 2016-23 \/ Toyota Fullsize Truck 2000-21 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: TORTTN\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 6.35 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2000-2023 Toyota Tacoma, Tundra applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888461983996,"sku":"FDCP_TORTTN","price":269.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMTORTTN.jpg?v=1774475872"},{"product_id":"timbren-ses-kit-rear-dodge-crew-quad-cab","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR1500DQ","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR1500DQ is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - Crew \/ Quad Cab - Dodge Ram Fullsize Truck 2009-23 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: DR1500DQ\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 4.90 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2009-2026 Dodge, Ram 1500, 1500 Classic, Ram 1500 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888462213372,"sku":"FDCP_DR1500DQ","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMDR1500DQ.jpg?v=1774475886"},{"product_id":"timbren-ses-kit-front-dodge-3-4-1-ton-94-20","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DF25004B","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DF25004B is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Front - Hardware Included - Rubber - Black - 6000 lb Capacity - Dodge Ram Fullsize Truck 1994-2020 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: DF25004B\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 4.30 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1994-2023 Dodge, Ram 2500, 3500, Ram 1500, Ram 2500, Ram 3500 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888462868732,"sku":"FDCP_DF25004B","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMDF25004B.jpg?v=1774475921"},{"product_id":"timbren-ses-kit-rear-dodge-1-2-3-4-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR2500CA","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade DR2500CA is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Bolt-On - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - Dodge Ram Fullsize Truck 2002-08 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: DR2500CA\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 9.33 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2002-2013 Dodge, Ram 2500, Ram 1500, Ram 2500 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888463393020,"sku":"FDCP_DR2500CA","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMDR2500CA.jpg?v=1774475937"},{"product_id":"timbren-ses-kit-rear-20-jeep-gladiator","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade JRGD","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade JRGD is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 3000 lb Capacity - Jeep Gladiator 2020 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: JRGD\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 6.42 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2020-2023 Jeep Gladiator applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888463622396,"sku":"FDCP_JRGD","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMJRGD.jpg?v=1774475950"},{"product_id":"timbren-ses-kit-rear-toyota-tundra-1-2-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTUN4","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade TORTUN4 is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - Toyota Fullsize Truck 2000-12 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: TORTUN4\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 5.75 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2000-2023 Nissan, Toyota Tacoma, Titan, Tundra applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888463950076,"sku":"FDCP_TORTUN4","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMTORTUN4.jpg?v=1774475972"},{"product_id":"timbren-ses-kit-rear-ford-4x4-3-4-ton","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDE","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDE is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - Ford Fullsize Truck 1970-2004 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR250SDE\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 8.90 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1970-2004 Ford F 100, F 150, F 250, F 250 Super Duty applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888464179452,"sku":"FDCP_FR250SDE","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR250SDE.jpg?v=1774475985"},{"product_id":"timbren-ses-kit-rear-ford-3-4-ton-1","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDG","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade FR250SDG is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 8600 lb Capacity - Ford Fullsize Truck 2011-12 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: FR250SDG\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 7.80 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2011-2016 Ford F 250 Super Duty applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888464408828,"sku":"FDCP_FR250SDG","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMFR250SDG.jpg?v=1774476000"},{"product_id":"timbren-ses-kit-front-gm-1-2-ton-99-06","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK15A","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMFK15A is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Front - Hardware Included - Rubber - Black - 14000 lb Capacity - GM Fullsize SUV \/ Truck \/ Van 1999-2020 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMFK15A\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 2.55 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1999-2023 Cadillac, Chevrolet, GMC Avalanche 1500, City Express, Escalade, Escalade Esv, Escalade Ext, Express 1500+ applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888464605436,"sku":"FDCP_GMFK15A","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMFK15A.jpg?v=1774476014"},{"product_id":"timbren-ses-kit-rear-gm-1-2-3-4-ton-1","title":"Timbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25","description":"\u003cp\u003eTimbren Helper Spring Kit SES OEM Style Suspension Bump Stop Upgrade GMRCK25 is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - OEM Style - Stock Height - Rear - Hardware Included - Rubber - Black - 6000 lb Capacity - GM Fullsize Truck 1988-2000 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRCK25\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 12.78 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 1988-2000 Chevrolet, GMC K1500, K2500 applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888464736508,"sku":"FDCP_GMRCK25","price":269.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRCK25.jpg?v=1774476021"},{"product_id":"suspension-enhancement-system","title":"Timbren Helper Spring Kit SES Stock Height Suspension Bump Stop Upgrade GMRS15","description":"\u003cp\u003eTimbren Helper Spring Kit SES Stock Height Suspension Bump Stop Upgrade GMRS15 is a suspension bump stop upgrade built for enthusiasts, repair shops, and builders who want reliable parts with clear fitment and clean product data. This listing has been rewritten for easier shopping, better search visibility, and a more complete Shopify product presentation.\u003c\/p\u003e \u003cp\u003eHelper Spring Kit - SES - Stock Height - Spacers \/ Discs \/ Hardware Included - Rear - Rubber - Black - GM Fullsize Truck 2019-24 - Kit.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrand: Timbren\u003c\/li\u003e \u003cli\u003ePart number: GMRS15\u003c\/li\u003e \u003cli\u003eProduct type: Bump Stops\u003c\/li\u003e \u003cli\u003eSuspension Support\u003c\/li\u003e\n\u003cli\u003eLoad Control\u003c\/li\u003e\n\u003cli\u003eRide Stability\u003c\/li\u003e \u003cli\u003eApproximate shipping weight: 6.83 lb\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerformance Benefits\u003c\/h3\u003e \u003cp\u003eThis part is selected for performance-focused builds, restoration projects, custom installations, and service replacement needs. It helps customers source the right component without digging through incomplete catalog data or unclear distributor descriptions.\u003c\/p\u003e \u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for 2019-2026 Chevrolet, GMC Sierra 1500, Sierra 1500 Limited, Silverado 1500, Silverado 1500 Ltd applications where listed. Always verify year, make, model, submodel, drivetrain, and installation requirements before purchase.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation is recommended when fabrication, driveline alignment, suspension setup, fuel-system work, or emissions-related components are involved. Review the manufacturer instructions before installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEmissions Note:\u003c\/strong\u003e No specific emissions tag was applied based on the product data provided. Confirm local requirements when installing performance parts.\u003c\/p\u003e \u003ch3\u003eWhy Buy From OzKonic Kustomz\u003c\/h3\u003e \u003cp\u003eOzKonic Kustomz focuses on automotive parts, accessories, and performance upgrades for truck, muscle, custom, and enthusiast builds. Order with confidence and contact us if you need help sourcing related parts that are not listed on the site.\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":48888464834812,"sku":"FDCP_GMRS15","price":269.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/TIMGMRS15.jpg?v=1774476028"}],"url":"https:\/\/ozkonickustomz.com\/collections\/timbren.oembed","provider":"Ozkonic Kustomz LLC","version":"1.0","type":"link"}