{"title":"AEM Induction","description":"\u003ch2\u003eAEM Induction Performance Air Intake Systems\u003c\/h2\u003e\u003cp\u003eAEM Induction has been engineering high-performance air intake systems for over three decades, and their reputation is built on one thing: measurable results. If you're looking for a bolt-on horsepower and torque gain backed by dyno-proven data, AEM's cold air intakes, short ram intakes, and performance air filters are the benchmark for street and track applications. This collection carries AEM's full induction lineup for a wide range of domestic, import, and truck platforms.\u003c\/p\u003e\u003ch3\u003eMore Air. More Power. Less Restriction.\u003c\/h3\u003e\u003cp\u003eEvery AEM intake system is engineered to outflow the restrictive factory airbox and deliver a denser, cooler charge to your engine. Cold air intake systems relocate the filter away from engine heat, pulling in ambient air for maximum density and combustion efficiency. The result is real, seat-of-the-pants power — not just numbers on a spec sheet.\u003c\/p\u003e\u003cp\u003eAEM's Dryflow synthetic air filters require no oil, deliver exceptional filtration, and are washable and reusable for the life of the vehicle. Their intakes are constructed from mandrel-bent aluminum or rotomolded polyethylene tubing, designed to minimize turbulence and maximize velocity through the entire intake tract.\u003c\/p\u003e\u003ch3\u003eProven Gains Across Platforms\u003c\/h3\u003e\u003cp\u003eAEM publishes dyno results for every intake system they sell — no estimated gains, no marketing math. Depending on the application, expect 5–20+ horsepower and torque improvements over stock, with additional gains when paired with supporting modifications like a tune, exhaust, or throttle body upgrade. These intakes are a foundational mod for any performance build.\u003c\/p\u003e\u003cp\u003eAEM induction products are a direct fit for a broad range of applications including late-model GM trucks and SUVs, Ford Mustang and F-150 platforms, Honda and Acura sport compacts, Subaru WRX and STI, Nissan\/Infiniti, Toyota Tundra and Tacoma, and more. Vehicle-specific fitment ensures a clean, factory-quality install with no cutting or fabrication required.\u003c\/p\u003e\u003ch3\u003eStreet, Strip, and Daily Driver\u003c\/h3\u003e\u003cp\u003eAEM intakes are equally at home on a daily driver as they are on a dedicated track build. Their cold air systems include heat shields and sealed airboxes to maintain cold air separation in stop-and-go traffic. For forced induction builds, AEM's Brute Force intakes and air filter housings are engineered to handle the demands of turbocharged and supercharged applications.\u003c\/p\u003e\u003ch3\u003eWhy Ozkonic Kustomz\u003c\/h3\u003e\u003cp\u003eWe carry AEM Induction because it's one of the few brands that backs every claim with published data. Genuine AEM product, manufacturer warranty, and the right fitment for your build — that's what you get here. No substitutes, no guesswork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrowse the full AEM Induction lineup below\u003c\/strong\u003e and filter by your vehicle to find the right intake for your application. If you have questions about fitment or pairing with other mods, we're here.\u003c\/p\u003e","products":[{"product_id":"air-filter-wrap-3","title":"AEM Induction Air Filter Wrap - Dshd_aem-1-4002","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Air Filter Wrap - Dshd_aem-1-4002\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Air Filter Wrap - Dshd_aem-1-4002 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-1-4002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 0.05 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251695223036,"sku":"DSHD_AEM-1-4002","price":52.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP1-4002.jpg?v=1789070545"},{"product_id":"3-5in-dryflow-air-filter-1","title":"AEM Induction 3.5in Dryflow Air Filter - Dshd_aem-21-204DK","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction 3.5in Dryflow Air Filter - Dshd_aem-21-204DK\u003c\/h2\u003e\n\u003cp\u003eAEM Induction 3.5in Dryflow Air Filter - Dshd_aem-21-204DK gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-21-204DK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.33 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251695780092,"sku":"DSHD_AEM-21-204DK","price":83.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-204DK.jpg?v=1789070553"},{"product_id":"dryflow-air-filter-6in-x-5in","title":"AEM Induction Dryflow Air Filter 6in X 5in - Dshd_aem-21-209EDK","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter 6in X 5in - Dshd_aem-21-209EDK\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter 6in X 5in - Dshd_aem-21-209EDK gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-21-209EDK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.78 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251696173308,"sku":"DSHD_AEM-21-209EDK","price":83.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-209EDK.jpg?v=1789070563"},{"product_id":"air-filter-4in-x-9-1-4in-x-1in-dryflow","title":"AEM Induction Air Filter 4in X 9-1 4in X 1in Dryflow - Dshd_aem-21-3059DK","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Air Filter 4in X 9-1 4in X 1in Dryflow - Dshd_aem-21-3059DK\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Air Filter 4in X 9-1 4in X 1in Dryflow - Dshd_aem-21-3059DK gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-21-3059DK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.78 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251696599292,"sku":"DSHD_AEM-21-3059DK","price":83.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-3059DK.jpg?v=1789070570"},{"product_id":"aem-dryflow-air-filter-10","title":"AEM Induction AEM Dryflow Air Filter - Dshd_aem-21-2258DK","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction AEM Dryflow Air Filter - Dshd_aem-21-2258DK\u003c\/h2\u003e\n\u003cp\u003eAEM Induction AEM Dryflow Air Filter - Dshd_aem-21-2258DK gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-21-2258DK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 3.00 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251696894204,"sku":"DSHD_AEM-21-2258DK","price":104.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-2258DK.jpg?v=1789070578"},{"product_id":"aem-cold-air-intake-syst-em-c-a-s-mits-lancer-ev","title":"AEM Induction AEM 21-678C Cold Air Intake System Mitsubishi Lancer Evolution - Dshd_aem-21-678C","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction AEM 21-678C Cold Air Intake System Mitsubishi Lancer Evolution - Dshd_aem-21-678C\u003c\/h2\u003e\n\u003cp\u003eAEM Induction AEM 21-678C Cold Air Intake System Mitsubishi Lancer Evolution - Dshd_aem-21-678C gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-21-678C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 9.00 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEmissions:\u003c\/strong\u003e Review local, state, and federal emissions regulations before installation. This item may require emissions verification depending on application.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251697189116,"sku":"DSHD_AEM-21-678C","price":430.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-678C.jpg?v=1789070586"},{"product_id":"dryflow-air-filter-24","title":"AEM Induction Dryflow Air Filter - Dshd_aem-28-20438","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-20438\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-20438 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-28-20438\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.85 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251697484028,"sku":"DSHD_AEM-28-20438","price":58.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20438.jpg?v=1789070594"},{"product_id":"dryflow-air-filter-25","title":"AEM Induction Dryflow Air Filter - Dshd_aem-28-50049","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-50049\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-50049 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-28-50049\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.65 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251697680636,"sku":"DSHD_AEM-28-50049","price":48.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50049.jpg?v=1789070602"},{"product_id":"dryflow-air-filter-26","title":"AEM Induction Dryflow Air Filter - Dshd_aem-28-30005","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-30005\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-30005 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-28-30005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.45 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251704070396,"sku":"DSHD_AEM-28-30005","price":48.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-30005.jpg?v=1789070610"},{"product_id":"dryflow-air-filter-27","title":"AEM Induction Dryflow Air Filter - Dshd_aem-28-20480","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-20480\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-20480 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-28-20480\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.45 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251704692988,"sku":"DSHD_AEM-28-20480","price":54.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20480.jpg?v=1789070618"},{"product_id":"dryflow-air-filter-28","title":"AEM Induction Dryflow Air Filter - Dshd_aem-28-50064","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-50064\u003c\/h2\u003e\n\u003cp\u003eAEM Induction Dryflow Air Filter - Dshd_aem-28-50064 gives builders a clean, performance-focused option for dependable fitment, straightforward product matching, and confident checkout. Built for enthusiasts, shops, and vehicle owners who want quality parts without guessing through messy catalog data.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003efuel system\u003c\/li\u003e\n\u003cli\u003eperformance fuel\u003c\/li\u003e\n\u003cli\u003erace fuel\u003c\/li\u003e\n\u003cli\u003eBuilt for performance-focused automotive applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal \/ custom application\u003c\/p\u003e\n\u003cp\u003eVerify year, make, model, measurements, and installation requirements before ordering.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e DSHD_AEM-28-50064\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fuel System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Shipping Weight:\u003c\/strong\u003e 1.45 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AEM Induction","offers":[{"title":"Default Title","offer_id":51251705413884,"sku":"DSHD_AEM-28-50064","price":58.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50064.jpg?v=1789070627"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-50083-for-2019-2026-gm-full-size-suvs-and-trucks","title":"AEM Induction DryFlow Air Filter AEM-28-50083 for 2019-2026 GM Full-Size SUVs and Trucks","description":"\u003cp\u003eUpgrade your vehicle’s intake protection and airflow with the AEM Induction DryFlow Air Filter, part number AEM-28-50083. Designed for select 2019-2026 GM full-size SUVs and trucks, this reusable panel-style filter uses synthetic filter media to help capture airborne contaminants before they reach the engine. Its red finish provides a distinctive appearance while maintaining the dependable filtration performance expected from the DryFlow product line.\u003cbr\u003eThe AEM-28-50083 is engineered as a dry air filter, eliminating the need for filter oil during servicing. This design simplifies maintenance and helps reduce the mess associated with cleaning and re-oiling traditional cotton filters. The panel configuration is intended to provide a direct-fit replacement for the factory air filter in compatible applications, supporting straightforward installation without requiring major intake system modifications.\u003cbr\u003eBuilt for repeated use, the AEM Induction DryFlow filter can be cleaned and serviced according to AEM recommendations, helping extend service life compared with disposable paper filters. The synthetic media is designed to balance airflow and filtration for everyday driving, towing, hauling, and other demanding conditions. Verify vehicle fitment before ordering to ensure compatibility with your specific GM application and model-year configuration.\u003cbr\u003eAEM Induction combines practical serviceability with application-specific design in the DryFlow AEM-28-50083. This replacement air filter is a suitable choice for drivers seeking a reusable, dry-filter solution for their compatible GM full-size SUV or truck. The filter is supplied individually and is not designated as air-restricted or truck-freight-only.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-50083\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable dry panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select 2019-2026 GM full-size SUVs and trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Cleanable and serviceable without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed as a direct-fit replacement for compatible factory air filter applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644604645628,"sku":"AIP28-50083","price":67.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50083_13ee7d26-012c-4bc5-96d2-c352ba95a0b7.jpg?v=1791111826"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-50064-for-subaru-applications","title":"AEM Induction DryFlow Air Filter AEM-28-50064 for Subaru Applications","description":"\u003cp\u003eUpgrade your vehicle’s air filtration system with the AEM Induction DryFlow Air Filter, part number AEM-28-50064. Designed as a direct-fit panel filter for various Subaru applications, this reusable air filter helps provide clean, consistent airflow to the engine while supporting dependable performance. Its synthetic filter media is engineered for effective filtration without the need for traditional filter oil, making maintenance straightforward and convenient.\u003cbr\u003eThe DryFlow filter features a durable red synthetic construction designed to withstand repeated service and everyday driving conditions. The precision panel design is shaped for proper placement within the factory airbox, helping maintain a secure fit and reliable sealing when installed correctly. By replacing a restrictive or clogged factory filter with a clean AEM Induction element, drivers can help support efficient engine operation and responsive airflow.\u003cbr\u003eFeature: Brand - AEM Induction\u003cbr\u003eFeature: Part Number - AEM-28-50064\u003cbr\u003eFeature: Filter Type - DryFlow panel air filter\u003cbr\u003eFeature: Filter Media - Reusable synthetic material\u003cbr\u003eFeature: Color - Red\u003cbr\u003eFeature: Vehicle Fitment - Various Subaru applications\u003cbr\u003eFeature: Maintenance - Designed for cleaning and reuse without filter oil\u003cbr\u003eFeature: Installation - Direct replacement-style fit for the original airbox\u003cbr\u003eFeature: Quantity - Sold individually\u003cbr\u003eBefore installation, verify vehicle compatibility and compare the replacement filter with the original component. Follow the manufacturer’s cleaning and service recommendations to preserve filtration performance and extend the service life of the AEM Induction DryFlow Air Filter. This filter is intended for use in the factory airbox and should be installed with all original retaining hardware and sealing surfaces properly positioned.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand - AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number - AEM-28-50064\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type - DryFlow panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media - Reusable synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor - Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment - Various Subaru applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance - Designed for cleaning and reuse without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation - Direct replacement-style fit for the original airbox\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity - Sold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644605726972,"sku":"AIP28-50064","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50064_cd6a1e72-bdbd-4e02-8b3e-a3ef0fe64f27.jpg?v=1791111853"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-50060-for-subaru-brz-and-toyota-gr86","title":"AEM Induction DryFlow Air Filter Element AEM-28-50060 for Subaru BRZ and Toyota GR86","description":"\u003cp\u003eUpgrade the air intake system in your compatible Subaru BRZ or Toyota GR86 with the AEM Induction DryFlow Air Filter Element, part number AEM-28-50060. Designed as a direct-fit replacement for select 2017–2026 vehicles, this panel-style filter helps provide clean, consistent airflow to the engine while protecting intake components from dirt and airborne debris. Its synthetic filter media is engineered for dependable performance in street-driven applications.\u003cbr\u003eThe DryFlow design uses a dry, washable filter media that does not require filter oil, helping simplify maintenance and reduce the mess associated with traditional oiled filters. The red filter construction adds a distinctive appearance under the hood, while the precision-fit panel format supports straightforward installation in the factory airbox. This AEM Induction air filter is sold individually and is suited for drivers seeking a reusable alternative to disposable replacement filters.\u003cbr\u003eFeature: Brand — AEM Induction\u003cbr\u003eFeature: Part number — AEM-28-50060\u003cbr\u003eFeature: Filter type — DryFlow panel air filter element\u003cbr\u003eFeature: Filter media — Synthetic, washable, dry media\u003cbr\u003eFeature: Filter color — Red\u003cbr\u003eFeature: Vehicle fitment — Select Subaru BRZ and Toyota GR86 models from 2017–2026\u003cbr\u003eFeature: Installation — Designed as a direct-fit replacement for the factory air filter\u003cbr\u003eFeature: Maintenance — No filter oil required\u003cbr\u003eBefore installation, confirm vehicle compatibility and compare the existing filter with the application requirements. Replace or service the filter according to driving conditions and manufacturer recommendations, especially when operating in dusty or high-debris environments. The AEM-28-50060 DryFlow replacement filter offers a practical, reusable solution for maintaining clean intake air on compatible Subaru and Toyota sports cars.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-50060\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic, washable, dry media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Color: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Subaru BRZ and Toyota GR86 models from 2017–2026\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct-fit replacement for the factory air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: No filter oil required\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644609429756,"sku":"AIP28-50060","price":42.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50060_68d6ca69-a96a-411f-8b41-4c0c0a8c4f77.jpg?v=1791111885"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-50045-for-honda-civic-and-hr-v","title":"AEM Induction DryFlow Air Filter Element AEM-28-50045 for Honda Civic and HR-V","description":"\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter Element, part number AEM-28-50045. Designed as a direct-fit replacement for select Honda Civic models from 2016 through 2026 and Honda HR-V models from 2024 through 2026, this panel-style filter helps protect the engine from airborne dirt and debris while supporting consistent airflow. Its synthetic filter media provides durable, reusable filtration for street-driven vehicles and performance-focused applications.\u003cbr\u003eThe DryFlow filter uses a dry synthetic construction that does not require filter oil, helping simplify installation and routine maintenance. The red filter media and durable panel design provide reliable service in the factory airbox while maintaining a clean, professional appearance. With its vehicle-specific fitment, the AEM-28-50045 is engineered to install as a replacement air filter without requiring custom modifications.\u003cbr\u003eFeature: Brand - AEM Induction\u003cbr\u003eFeature: Part Number - AEM-28-50045\u003cbr\u003eFeature: Filter Type - DryFlow panel air filter element\u003cbr\u003eFeature: Filter Media - Synthetic, dry media\u003cbr\u003eFeature: Color - Red\u003cbr\u003eFeature: Vehicle Fitment - Select Honda Civic models from 2016 through 2026 and Honda HR-V models from 2024 through 2026\u003cbr\u003eFeature: Installation - Designed for direct replacement in the factory airbox\u003cbr\u003eFeature: Maintenance - Does not require filter oil\u003cbr\u003eFeature: Quantity - Sold individually\u003cbr\u003eChoose the AEM Induction DryFlow Air Filter Element for dependable engine air filtration and convenient maintenance. Verify vehicle application before installation to ensure compatibility with the specific Honda Civic or HR-V model and engine configuration.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-50045\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic, dry media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Honda Civic models from 2016 through 2026 and Honda HR-V models from 2024 through 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed for direct replacement in the factory airbox\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Does not require filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644613558524,"sku":"AIP28-50045","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50045_e78b8563-3d05-4cfa-a747-cde035d6c696.jpg?v=1791111924"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-50044-for-2014-2022-honda-civic-and-cr-v","title":"AEM Induction DryFlow Air Filter Element AEM-28-50044 for 2014-2022 Honda Civic and CR-V","description":"\u003cp\u003eUpgrade your vehicle’s air filtration system with the AEM Induction DryFlow Air Filter Element, part number AEM-28-50044. Designed for select 2014-2022 Honda Civic and Honda CR-V applications, this replacement panel filter helps provide clean, consistent airflow to the engine without the need for filter oil. Its synthetic filter media is engineered for dependable performance in daily driving and demanding conditions.\u003c\/p\u003e\n\u003cp\u003eThe DryFlow design uses a washable, reusable synthetic media that helps capture airborne contaminants while supporting efficient airflow. The red filter element is built as a direct-fit replacement for compatible factory-style air boxes, helping simplify installation and maintenance. With its panel-style construction and approximately 1.5-inch profile, the AEM-28-50044 is designed to fit the specified application without modifications.\u003c\/p\u003e\n\u003cp\u003eRoutine cleaning can help extend the service life of this reusable filter and maintain filtration performance over time. The oil-free design makes servicing straightforward and helps eliminate the mess associated with traditional oiled performance filters. Always verify vehicle compatibility and compare the original filter before installation to ensure the correct fit for your specific Honda model and configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e AEM-28-50044\u003cbr\u003e\u003cstrong\u003eFilter Type:\u003c\/strong\u003e DryFlow synthetic panel air filter\u003cbr\u003e\u003cstrong\u003eServiceability:\u003c\/strong\u003e Washable and reusable\u003cbr\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e Select 2014-2022 Honda Civic and CR-V models\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDryFlow synthetic media provides reusable, oil-free air filtration\u003c\/li\u003e\n\u003cli\u003ePanel-style replacement filter is designed for compatible factory air boxes\u003c\/li\u003e\n\u003cli\u003eWashable construction supports long-term serviceability\u003c\/li\u003e\n\u003cli\u003eHelps protect the engine from airborne dirt and debris\u003c\/li\u003e\n\u003cli\u003eRed filter element provides a distinctive performance-oriented appearance\u003c\/li\u003e\n\u003cli\u003eDesigned for select 2014-2022 Honda Civic and CR-V applications\u003c\/li\u003e\n\u003cli\u003eAEM Induction part number AEM-28-50044\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644614050044,"sku":"AIP28-50044","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50044_4896bf3c-74f0-47d5-b68c-e933573855d3.jpg?v=1791111952"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-50041-for-acura-and-honda","title":"AEM Induction DryFlow Air Filter AEM-28-50041 for Acura and Honda","description":"\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter, part number AEM-28-50041. Designed as a direct-fit replacement for various Acura and Honda applications, this panel-style filter helps protect the engine from dirt, dust, and other airborne contaminants while supporting consistent airflow. Its synthetic filter media provides reliable filtration without the need for oil, making maintenance straightforward and convenient.\u003cbr\u003eThe DryFlow filter features a durable red synthetic element built for repeated cleaning and long-term service. The panel design fits securely within the factory airbox, helping maintain proper intake system operation and simplifying installation. As a reusable alternative to disposable paper filters, the AEM Induction DryFlow Air Filter can help reduce replacement waste and provide dependable performance over the life of the vehicle.\u003cbr\u003eFeature: Brand - AEM Induction\u003cbr\u003eFeature: Part Number - AEM-28-50041\u003cbr\u003eFeature: Product Type - DryFlow air filter element\u003cbr\u003eFeature: Filter Style - Panel\u003cbr\u003eFeature: Filter Media - Reusable synthetic material\u003cbr\u003eFeature: Color - Red\u003cbr\u003eFeature: Maintenance - Washable and oil-free\u003cbr\u003eFeature: Vehicle Fitment - Various Acura and Honda applications\u003cbr\u003eFeature: Quantity - One air filter element\u003cbr\u003eThis AEM Induction DryFlow Air Filter is intended for drivers seeking a durable, serviceable replacement filter for compatible Acura or Honda intake systems. Confirm vehicle fitment before ordering to ensure compatibility with the original airbox and application requirements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction DryFlow air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number AEM-28-50041\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style reusable synthetic filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed filter media with an oil-free design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWashable construction for repeated service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits various Acura and Honda applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect replacement for compatible factory airbox systems\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644615196924,"sku":"AIP28-50041","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50041_d841abd6-9d14-4c8b-a6c1-da77bd2e5adc.jpg?v=1791111980"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-50029-for-2015-2023-ford-mustang","title":"AEM Induction DryFlow Air Filter AEM-28-50029 for 2015-2023 Ford Mustang","description":"\u003cp\u003eUpgrade the air intake system in your 2015-2023 Ford Mustang with the AEM Induction DryFlow Air Filter, part number AEM-28-50029. This replacement panel air filter is designed to provide dependable filtration and consistent airflow for street-driven performance vehicles. Its synthetic filter media helps capture airborne contaminants before they reach the engine, supporting clean intake air and reliable operation.\u003cbr\u003eThe DryFlow filter uses a dry synthetic construction that does not require filter oil, helping simplify maintenance and reduce servicing mess. The red filter media and panel-style design provide a direct-fit replacement for the original intake filter application, making installation straightforward for compatible Mustang models. Built for repeated use, this washable and reusable filter can help provide long-term value compared with disposable paper filters when properly maintained.\u003cbr\u003eDesigned specifically for select 2015-2023 Ford Mustang applications, the AEM-28-50029 combines practical filtration with an efficient intake design. Verify vehicle fitment before installation to ensure compatibility with your specific engine and intake configuration. The filter is supplied individually and is intended for replacement use in the factory-style airbox or compatible AEM intake system.\u003cbr\u003eFeature: Dry synthetic filter media provides effective filtration without the use of oil.\u003cbr\u003eFeature: Panel-style replacement design supports straightforward installation.\u003cbr\u003eFeature: Washable and reusable construction helps simplify long-term maintenance.\u003cbr\u003eFeature: Red filter media offers a distinctive appearance under the hood.\u003cbr\u003eFeature: Designed for select 2015-2023 Ford Mustang applications.\u003cbr\u003eFeature: AEM Induction part number AEM-28-50029.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDry synthetic filter media provides effective filtration without the use of oil.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style replacement design supports straightforward installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWashable and reusable construction helps simplify long-term maintenance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed filter media offers a distinctive appearance under the hood.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select 2015-2023 Ford Mustang applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAEM Induction part number AEM-28-50029.\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644620308732,"sku":"AIP28-50029","price":67.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-50029_6d8a3ceb-c96d-4479-988c-d14ba1fa6116.jpg?v=1791112008"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-30059-for-mercedes-benz-nissan-and-renault","title":"AEM Induction DryFlow Air Filter Element AEM-28-30059 for Mercedes-Benz, Nissan and Renault","description":"\u003cp\u003eThe AEM Induction DryFlow Air Filter Element AEM-28-30059 is designed to provide dependable air filtration for various Mercedes-Benz, Nissan and Renault applications. This panel-style replacement filter uses a synthetic filtration media engineered to help capture airborne dirt and debris before they reach the engine, supporting clean intake airflow and consistent filtration performance.\u003cbr\u003eThe DryFlow design offers the convenience of a dry, reusable-style filter construction without requiring filter oil. Its red synthetic media is housed in a panel configuration intended for direct replacement of the original air filter in compatible intake systems. The filter element is suitable for drivers seeking a practical upgrade or replacement for a worn or restricted factory filter.\u003cbr\u003eFeature: DryFlow synthetic filtration media helps capture contaminants while supporting efficient intake airflow. Feature: Panel-style construction is designed for a precise fit in compatible airbox applications. Feature: Dry, oil-free design simplifies servicing and maintenance. Feature: Red filter media provides a distinctive appearance under the hood. Feature: Application coverage includes various Mercedes-Benz, Nissan and Renault vehicles; verify vehicle compatibility before installation.\u003cbr\u003eThe AEM Induction AEM-28-30059 air filter element is intended for straightforward installation using the vehicle’s existing airbox and retaining hardware. Replace the filter according to the vehicle manufacturer’s service recommendations or when inspection shows excessive dirt, damage or airflow restriction. This product is not identified as air restricted and is not designated for truck-freight-only shipment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDryFlow synthetic filtration media helps capture contaminants while supporting efficient intake airflow.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style construction is designed for a precise fit in compatible airbox applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDry, oil-free design simplifies servicing and maintenance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed filter media provides a distinctive appearance under the hood.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits various Mercedes-Benz, Nissan and Renault applications; verify vehicle compatibility before installation.\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644628140284,"sku":"AIP28-30059","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-30059_ea2b583a-290f-4c21-b9ce-54c31fec65bd.jpg?v=1791112043"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20945-for-audi-applications","title":"AEM Induction DryFlow Air Filter Element AEM-28-20945 for Audi Applications","description":"\u003cp\u003eUpgrade your vehicle’s air filtration system with the AEM Induction DryFlow Air Filter Element, part number AEM-28-20945. Designed for various Audi applications, this panel-style filter uses a synthetic filter media engineered to provide reliable airflow while helping capture dirt, dust, and other airborne contaminants before they reach the engine. Its red filter media adds a distinctive appearance under the hood while maintaining the practical performance expected from the DryFlow product line.\u003cbr\u003eThe AEM-28-20945 is a dry, washable air filter element that eliminates the need for filter oil during servicing. This makes routine maintenance cleaner and more straightforward while supporting consistent filtration over the life of the filter. The panel configuration is designed as a direct replacement for compatible factory-style air filters, helping simplify installation and maintain proper fitment within the original airbox.\u003cbr\u003eBuilt for drivers seeking a reusable alternative to disposable paper filters, the AEM Induction DryFlow filter is suitable for daily driving and performance-focused applications alike. Confirm vehicle compatibility before ordering, as fitment varies among Audi models and configurations. The filter is sold individually and is not restricted for air shipment or designated as truck-freight-only.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20945\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Washable synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Color: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Compatibility: Various Audi applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Designed for servicing without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct replacement-style design for compatible factory airboxes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShipping Classification: Not air restricted and not truck-freight-only\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644630761724,"sku":"AIP28-20945","price":42.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20945_3d4bf29d-4f87-4fa9-b1ff-7db5d7208dd5.jpg?v=1791112074"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20865-for-select-audi-volkswagen-and-seat-applications","title":"AEM Induction DryFlow Air Filter AEM-28-20865 for Select Audi, Volkswagen and SEAT Applications","description":"\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter, part number AEM-28-20865. This replacement panel filter is designed for various Audi, Volkswagen, and SEAT applications, providing a dependable fit and consistent filtration for compatible factory air boxes. Its synthetic filter media helps capture dirt and airborne contaminants while supporting efficient airflow to the engine.\u003cbr\u003eThe DryFlow design uses a dry, synthetic media that does not require filter oil, simplifying installation and maintenance. The washable and reusable construction can provide long-term service when cleaned according to the manufacturer’s recommendations, making it a practical alternative to disposable replacement filters. The red filter media also gives the engine compartment a distinctive appearance while maintaining the functional performance expected from AEM Induction products.\u003cbr\u003eInstallation is straightforward for compatible vehicles: remove the original panel filter, clean the airbox if necessary, and install the AEM Induction filter in the same orientation. Always verify vehicle fitment before ordering, as application coverage may vary by model, engine, and production year. The AEM-28-20865 is supplied as one air filter element and is intended for replacement use in approved Audi, Volkswagen, and SEAT applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20865\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic dry media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable and reusable design without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select Audi, Volkswagen and SEAT vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: One air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAir Restricted: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTruck Freight Only: No\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644631220476,"sku":"AIP28-20865","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20865_c02a95bf-4e5a-47b8-b740-cc416237aed2.jpg?v=1791112103"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20857-for-audi-volkswagen-and-porsche","title":"AEM Induction DryFlow Air Filter Element AEM-28-20857 for Audi, Volkswagen and Porsche","description":"\u003cp\u003eImprove intake air protection and maintain dependable airflow with the AEM Induction DryFlow Air Filter Element, part number AEM-28-20857. Designed as a direct-fit panel filter for various Audi, Volkswagen, and Porsche applications, this reusable filter uses synthetic filter media to capture dirt and airborne debris before they reach the engine. Its red media and durable construction provide a practical replacement for compatible factory-style air filters.\u003cbr\u003eThe DryFlow filter is engineered for convenient maintenance without filter oil. This helps simplify servicing while supporting consistent filtration performance during everyday driving and demanding road conditions. The panel-style design is shaped for proper placement in the factory airbox on applicable vehicles, helping preserve the intended intake system configuration while replacing a worn or restricted filter element.\u003cbr\u003eFeature: Brand: AEM Induction\u003cbr\u003eFeature: Part Number: AEM-28-20857\u003cbr\u003eFeature: Product Type: DryFlow air filter element\u003cbr\u003eFeature: Filter Style: Panel\u003cbr\u003eFeature: Filter Media: Synthetic\u003cbr\u003eFeature: Color: Red\u003cbr\u003eFeature: Vehicle Applications: Various Audi, Volkswagen, and Porsche models\u003cbr\u003eFeature: Maintenance: Reusable, dry media design with no filter oil required\u003cbr\u003eFeature: Sold As: Each\u003cbr\u003eBefore ordering, verify vehicle fitment and application details for the specific year, make, model, engine, and intake system. Proper fitment is essential for sealing the airbox and maintaining effective filtration. This AEM Induction DryFlow replacement filter is intended for compatible applications and offers a straightforward solution for routine air filter service.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction DryFlow air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart number AEM-28-20857\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style design for compatible factory airboxes\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSynthetic, reusable filter media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed filter media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDry design does not require filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFits various Audi, Volkswagen, and Porsche applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644632563964,"sku":"AIP28-20857","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20857_d65feaeb-1deb-4acd-a5fa-4da0c18a40c4.jpg?v=1791112132"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20480-for-mazda-applications","title":"AEM Induction DryFlow Air Filter Element AEM-28-20480 for Mazda Applications","description":"\u003cp\u003eImprove intake air filtration with the AEM Induction DryFlow Air Filter Element, part number AEM-28-20480. Designed as a panel-style replacement filter for various Mazda applications, this filter helps protect the engine from airborne dirt and debris while supporting dependable airflow through the intake system. Its synthetic filter media offers a durable, reusable-style construction suited to drivers seeking a high-quality alternative to conventional replacement filters.\u003cbr\u003eThe DryFlow filter features a red synthetic element and a panel configuration designed for a precise fit in compatible factory airbox systems. Its dry media does not require filter oil, helping simplify installation and routine service. Always confirm vehicle compatibility before ordering to ensure the AEM-28-20480 matches your specific Mazda model, engine, and intake configuration.\u003cbr\u003eBuilt by AEM Induction, the DryFlow Air Filter Element combines practical maintenance benefits with reliable filtration performance for everyday driving and performance-oriented applications. The filter arrives ready for installation and is supplied as one air filter element. It is not air restricted and is not designated for truck-freight-only shipment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20480\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic dry filter media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Various Mazda applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Oil-free design for simplified servicing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShipping Classification: Not truck-freight-only\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644636725500,"sku":"AIP28-20480","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20480_4e524759-81d7-470a-b644-5665302f164e.jpg?v=1791112164"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20460-for-2011-2022-dodge-challenger-and-charger","title":"AEM Induction DryFlow Air Filter Element AEM-28-20460 for 2011-2022 Dodge Challenger and Charger","description":"DryFlow Air Filter 11- Challenger 3.6\/5.7\/6.4L\n\u003cp\u003eUpgrade your vehicle’s air intake protection with the AEM Induction DryFlow Air Filter Element, part number AEM-28-20460. Designed for select 2011-2022 Dodge Challenger and Dodge Charger applications equipped with 3.6L, 5.7L, or 6.4L engines, this reusable panel-style filter provides dependable filtration for performance-oriented driving and everyday use. Its synthetic filter media helps capture airborne contaminants before they reach the engine while supporting consistent airflow through the intake system.\u003cbr\u003eThe DryFlow filter uses a durable red synthetic media that does not require oiling, helping simplify maintenance and reduce the mess associated with traditional oiled filters. The panel design is shaped for a direct-fit installation in the factory airbox, allowing you to replace a worn or restrictive filter without modifying the vehicle’s intake system. AEM Induction engineering provides a reliable fit and construction suited to demanding under-hood conditions.\u003cbr\u003eFeature: DryFlow synthetic filter media helps trap dirt and debris without requiring filter oil.\u003cbr\u003eFeature: Reusable design supports long-term service and periodic cleaning.\u003cbr\u003eFeature: Panel-style element is engineered for direct-fit installation in compatible factory airboxes.\u003cbr\u003eFeature: Red synthetic media provides durable construction and a distinctive performance appearance.\u003cbr\u003eFeature: Compatible with select 2011-2022 Dodge Challenger and Dodge Charger models with 3.6L, 5.7L, and 6.4L engines.\u003cbr\u003eThe AEM Induction AEM-28-20460 is a practical replacement air filter for drivers seeking dependable engine protection, simplified maintenance, and consistent intake performance. Verify vehicle fitment and airbox compatibility before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDryFlow synthetic filter media helps trap dirt and debris without requiring filter oil.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable design supports long-term service and periodic cleaning.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style element is engineered for direct-fit installation in compatible factory airboxes.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed synthetic media provides durable construction and a distinctive performance appearance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with select 2011-2022 Dodge Challenger and Dodge Charger models with 3.6L, 5.7L, and 6.4L engines.\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644640887036,"sku":"AIP28-20460","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20460_675ec708-b18b-423e-ba2c-46ae747c4e0d.jpg?v=1791112203"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20452-for-toyota-and-lexus","title":"AEM Induction DryFlow Air Filter Element AEM-28-20452 for Toyota and Lexus","description":"\u003cp\u003eThe AEM Induction DryFlow Air Filter Element, part number AEM-28-20452, is a high-performance replacement air filter designed for various Toyota and Lexus applications. Its panel-style construction provides a precise fit while helping maintain consistent airflow to the engine. This filter is engineered for drivers seeking dependable filtration and durable performance without the maintenance requirements associated with traditional oiled filters.\u003cbr\u003eThe DryFlow filter uses synthetic filter media to capture airborne dirt, dust, and debris before they reach the engine. Its dry design allows for convenient installation and servicing, with no filter oil required. The red filter media and durable construction complement AEM Induction’s focus on reliable intake-system performance, making this filter a practical choice for street vehicles, trucks, and SUVs equipped with compatible factory or aftermarket airbox systems.\u003cbr\u003eDesigned for a direct replacement fit, the AEM-28-20452 features a panel profile approximately 9.125 inches long by 9.063 inches wide and 2.25 inches tall. Always verify vehicle compatibility and compare the original filter before installation, as fitment may vary by model, engine, and application. This air filter is sold individually and is intended for use in various Toyota and Lexus vehicles.\u003cbr\u003eFeature: AEM Induction DryFlow synthetic panel air filter\u003cbr\u003eFeature: Dry filter design requires no oiling\u003cbr\u003eFeature: Helps protect the engine from dirt and airborne debris\u003cbr\u003eFeature: Designed for various Toyota and Lexus applications\u003cbr\u003eFeature: Direct replacement-style fit for compatible airbox assemblies\u003cbr\u003eFeature: Sold individually\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction DryFlow synthetic panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDry filter design requires no oiling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eHelps protect the engine from dirt and airborne debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for various Toyota and Lexus applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect replacement-style fit for compatible airbox assemblies\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644645474556,"sku":"AIP28-20452","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20452_703ef165-d49f-4da6-8d52-43d4ea409e5c.jpg?v=1791112239"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20438-for-toyota-midsize-suvs","title":"AEM INDUCTION DryFlow Air Filter AEM-28-20438 for Toyota Midsize SUVs","description":"\u003cp\u003eUpgrade your vehicle’s air filtration system with the AEM INDUCTION DryFlow Air Filter, part number AEM-28-20438. Designed for select Toyota midsize SUVs from 2010 through 2024, this reusable panel-style filter provides dependable protection against dirt and airborne contaminants while supporting consistent airflow to the engine. Its synthetic filter media is engineered for everyday driving, making it a practical replacement for the original air filter.\u003cbr\u003eThe DryFlow filter features a durable red synthetic media that does not require oiling, helping simplify installation and routine maintenance. The precision-fit panel design is intended to install directly into the factory airbox without extensive modifications, providing a straightforward upgrade for drivers who want reliable filtration and convenient serviceability. Each filter is sold individually.\u003cbr\u003eFeature: Brand: AEM INDUCTION\u003cbr\u003eFeature: Part Number: AEM-28-20438\u003cbr\u003eFeature: Filter Type: DryFlow panel air filter\u003cbr\u003eFeature: Filter Media: Reusable synthetic material\u003cbr\u003eFeature: Media Color: Red\u003cbr\u003eFeature: Vehicle Application: Select Toyota midsize SUVs from 2010 through 2024\u003cbr\u003eFeature: Maintenance: Designed for use without filter oil\u003cbr\u003eFeature: Quantity: One air filter element\u003cbr\u003eThe AEM INDUCTION AEM-28-20438 DryFlow Air Filter is built for dependable fitment and long-term use in compatible Toyota applications. Verify vehicle compatibility before ordering to ensure the filter matches your specific model, engine, and airbox configuration.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDryFlow synthetic panel filter designed for select Toyota midsize SUVs from 2010 through 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable red filter media helps provide consistent engine air filtration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOil-free design simplifies servicing and maintenance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to fit the factory airbox for straightforward installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAEM INDUCTION part number AEM-28-20438\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644649210108,"sku":"AIP28-20438","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20438_9b3bf76e-ab0f-4446-8411-232e8fd2307d.jpg?v=1791112275"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20395-for-ford-midsize-cars-and-suvs","title":"AEM Induction DryFlow Air Filter AEM-28-20395 for Ford Midsize Cars and SUVs","description":"\u003cp\u003eUpgrade your vehicle’s air intake protection with the AEM Induction DryFlow Air Filter, part number AEM-28-20395. This reusable panel-style filter is engineered for select Ford midsize cars from 2007 through 2019 and midsize SUVs from 2007 through 2026. Its synthetic filter media helps capture airborne contaminants before they enter the engine, supporting clean airflow and dependable filtration performance for daily driving and performance-oriented applications.\u003cbr\u003eThe DryFlow design uses a dry synthetic media that does not require oil for servicing, helping simplify maintenance and reduce the mess associated with traditional oiled filters. The durable construction is designed for repeated cleaning and reuse when maintained according to the manufacturer’s recommendations. AEM’s red filter media and precision-fit panel configuration provide a direct-replacement solution for compatible factory airbox applications.\u003cbr\u003eDesigned for straightforward installation, the AEM-28-20395 air filter fits select applications without requiring permanent modifications to the vehicle. Always verify vehicle compatibility before purchase, as fitment may vary by engine, trim, and model configuration. This air filter is sold individually and is intended to replace the original equipment filter in the designated intake system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20395\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow reusable panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic dry media for oil-free servicing\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select Ford midsize cars from 2007 through 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Select Ford midsize SUVs from 2007 through 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct replacement for compatible factory airbox applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Cleanable and reusable when serviced according to manufacturer recommendations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: One air filter\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644654747900,"sku":"AIP28-20395","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20395_e4e7d4ee-f5f0-47c4-a8a4-a37deb25e0ad.jpg?v=1791112324"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20387-for-toyota-full-size-trucks-land-cruiser-and-sequoia","title":"AEM Induction DryFlow Air Filter AEM-28-20387 for Toyota Full-Size Trucks, Land Cruiser and Sequoia","description":"\u003cp\u003eUpgrade your vehicle’s air intake system with the AEM Induction DryFlow Air Filter, part number AEM-28-20387. This reusable synthetic panel filter is designed for dependable filtration and consistent airflow without the need for filter oil. Its dry-flow construction helps capture airborne contaminants while supporting straightforward maintenance and convenient servicing.\u003cbr\u003eThe red synthetic filter media is built for repeated cleaning and reuse, making it a practical choice for drivers seeking a durable replacement for the original air filter. The panel-style design fits select Toyota applications and is engineered to support reliable engine air delivery under everyday driving conditions. Follow the manufacturer’s recommended cleaning and inspection procedures to help maintain performance over the service life of the filter.\u003cbr\u003eThis AEM Induction DryFlow air filter is compatible with select Toyota full-size trucks from 2007 through 2014, Toyota Land Cruiser models from 2007 through 2021, and Toyota Sequoia models from 2007 through 2013. Verify vehicle fitment before ordering to ensure the AEM-28-20387 filter matches your application. Each package includes one air filter element.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20387\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Dry-flow reusable panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable and reusable without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Toyota full-size trucks from 2007-2014\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Toyota Land Cruiser models from 2007-2021\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Toyota Sequoia models from 2007-2013\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: One air filter element\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644658909436,"sku":"AIP28-20387","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20387_df7e21e9-0ff7-4672-bf3a-74a937b2e645.jpg?v=1791112354"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20385-for-2007-2021-ford-full-size-trucks-and-suvs","title":"AEM Induction DryFlow Air Filter AEM-28-20385 for 2007-2021 Ford Full-Size Trucks and SUVs","description":"DryFlow Air Filter 07-21 Ford P\/U 4.6\/5.4L\n\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter AEM-28-20385. Designed for select 2007-2021 Ford full-size trucks and SUVs equipped with 4.6L or 5.4L engines, this reusable panel-style filter provides dependable protection against dirt and debris while supporting efficient airflow. Its synthetic filter media is engineered for durable service in demanding driving conditions.\u003cbr\u003eThe DryFlow filter uses a dry synthetic construction that does not require filter oil, helping simplify maintenance and reduce the mess associated with traditional oiled filters. The red filter media and panel design provide a direct-fit replacement solution for compatible factory airbox applications, making installation straightforward while preserving the original intake configuration. Always verify vehicle fitment before installation.\u003cbr\u003eBuilt for repeated use, the AEM Induction AEM-28-20385 can be cleaned and reused when properly maintained according to the manufacturer’s recommended service procedures. This replacement air filter is intended for drivers seeking consistent filtration, convenient upkeep, and long-term value from a high-quality aftermarket intake component. It is sold individually and is suitable for select Ford pickup and SUV applications from the 2007-2021 model years.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20385\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow reusable panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Compatibility: Select 2007-2021 Ford full-size trucks and SUVs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngine Compatibility: Select Ford 4.6L and 5.4L applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Durable synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable and reusable without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct-fit replacement for compatible factory airbox systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644662481148,"sku":"AIP28-20385","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20385_8ab6dda7-21af-4dc1-8325-e665cd566448.jpg?v=1791112376"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20360-for-toyota-applications","title":"AEM Induction DryFlow Air Filter Element AEM-28-20360 for Toyota Applications","description":"\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter Element, part number AEM-28-20360. Designed as a direct-fit panel filter for various Toyota applications, this reusable synthetic filter helps capture dirt and airborne contaminants before they reach the engine. Its dry media design eliminates the need for filter oil, making maintenance straightforward and helping provide consistent airflow for everyday driving and performance-focused applications.\u003cbr\u003eThe AEM-28-20360 features a durable synthetic filter medium housed in a distinctive red panel-style construction. DryFlow technology is engineered to balance filtration and airflow, supporting dependable engine protection without the mess or servicing requirements associated with traditional oiled filters. The element measures approximately 9.594 inches long by 6.906 inches wide and 1.469 inches tall, making it suitable for vehicle-specific replacement applications where the original filter uses a matching panel configuration.\u003cbr\u003eInstallation is designed to be simple, allowing the filter to replace the factory element using the existing airbox and retention hardware. Always verify vehicle compatibility and compare the original filter before installation, as fitment may vary among Toyota models and model years. The filter is supplied individually and is intended for use as a replacement air filter element rather than a complete intake system.\u003cbr\u003eChoose the AEM Induction DryFlow Air Filter Element for a clean, serviceable filtration solution backed by a brand known for automotive air intake products. With its washable synthetic media, dry-service design, and application-specific panel format, the AEM-28-20360 is a practical choice for maintaining reliable airflow and engine protection in compatible Toyota vehicles.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20360\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Reusable synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Various Toyota vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eService Design: Dry media requires no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: One filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAir Restricted: No\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTruck Freight Only: No\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644667527420,"sku":"AIP28-20360","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20360_16ff4190-3915-4276-8257-12a2c8d99412.jpg?v=1791112414"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20304-for-subaru-2003-2015","title":"AEM Induction DryFlow Air Filter AEM-28-20304 for Subaru 2003–2015","description":"DryFlow Air Filter 03- Subaru 1.6\/2.0\/2.5\/3.0L\n\u003cp\u003eUpgrade your vehicle’s air intake system with the AEM Induction DryFlow Air Filter, part number AEM-28-20304. Designed for various Subaru applications from 2003 through 2015, this reusable panel-style filter supports efficient airflow for select 1.6L, 2.0L, 2.5L, and 3.0L engines. Its synthetic filter media provides dependable filtration while helping protect the engine from airborne contaminants.\u003cbr\u003eThe DryFlow design uses a washable, oil-free synthetic media that simplifies maintenance and eliminates the need for filter oil. The red filter element is engineered for repeated cleaning and reuse, helping provide a practical alternative to disposable replacement filters. Its panel configuration is designed for a direct-fit installation in compatible factory air boxes without requiring extensive modifications.\u003cbr\u003eFeature: Brand: AEM Induction\u003cbr\u003eFeature: Part Number: AEM-28-20304\u003cbr\u003eFeature: Filter Type: DryFlow panel air filter\u003cbr\u003eFeature: Filter Media: Washable, reusable synthetic material\u003cbr\u003eFeature: Filter Color: Red\u003cbr\u003eFeature: Vehicle Coverage: Various Subaru models from 2003–2015\u003cbr\u003eFeature: Engine Coverage: Select 1.6L, 2.0L, 2.5L, and 3.0L applications\u003cbr\u003eFeature: Maintenance: Oil-free design for convenient cleaning and reuse\u003cbr\u003eVerify vehicle fitment before installation to ensure compatibility with the original air box and intake system. The AEM Induction DryFlow Air Filter AEM-28-20304 is a suitable replacement or performance-oriented upgrade for drivers seeking reusable filtration and consistent intake airflow in compatible Subaru vehicles.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20304\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Washable, reusable synthetic material\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Color: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Coverage: Various Subaru models from 2003–2015\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngine Coverage: Select 1.6L, 2.0L, 2.5L, and 3.0L applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Oil-free design for convenient cleaning and reuse\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644670411004,"sku":"AIP28-20304","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20304_b1cf699f-b3a1-4a25-a739-607cfd04d08e.jpg?v=1791112442"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20281-for-toyota-full-size-suvs-and-trucks","title":"AEM Induction DryFlow Air Filter AEM-28-20281 for Toyota Full-Size SUVs and Trucks","description":"AEM DryFlow Air Filter\n\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow Air Filter, part number AEM-28-20281. Designed as a direct-fit replacement for select Toyota full-size SUVs and trucks from 2003 through 2015, this reusable panel air filter helps protect the engine from dirt, dust, and other airborne contaminants while supporting efficient airflow. Its synthetic filter media is engineered for dependable filtration without the need for traditional oiling.\u003cbr\u003eThe DryFlow filter features a durable red construction and a practical panel-style design that fits the factory airbox in compatible applications. The reusable media allows for convenient maintenance and extended service life compared with many disposable paper filters, making it a useful upgrade for daily driving, work vehicles, and off-road use. Always verify vehicle fitment before installation to ensure compatibility with your specific Toyota model and engine configuration.\u003cbr\u003eInstallation is straightforward using standard replacement procedures, with no special modifications required when used in a compatible application. The AEM-28-20281 air filter is supplied individually and is built to provide consistent filtration and reliable performance under a range of driving conditions. Its dry synthetic design also simplifies servicing because it can be cleaned without applying filter oil. Follow AEM maintenance recommendations for best results and long-term protection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20281\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable dry-flow panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Synthetic material for dependable engine air filtration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select Toyota full-size SUVs and trucks from 2003 through 2015\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Cleanable design that does not require filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuantity: Sold individually\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644673786108,"sku":"AIP28-20281","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20281_79d8fc1f-3a86-425e-b611-20a682e53e79.jpg?v=1791112475"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20181-for-mercedes","title":"AEM Induction DryFlow Air Filter AEM-28-20181 for Mercedes","description":"AEM DryFlow Air Filter\n\u003cp\u003eThe AEM Induction DryFlow Air Filter AEM-28-20181 is a high-performance replacement air filter designed for select Mercedes applications. Its panel-style construction provides dependable filtration while supporting consistent airflow for street-driven vehicles and performance-focused applications. This reusable synthetic filter is built to deliver long service life without the need for oiling, making routine maintenance simpler and cleaner.\u003cbr\u003eThe DryFlow filter media captures airborne dirt and debris before they reach the engine, helping protect critical intake components and maintain reliable engine performance. Its durable red synthetic media is engineered for repeated cleaning and reuse when serviced according to AEM Induction recommendations. The precise panel design helps provide a secure fit within the factory airbox for straightforward installation.\u003cbr\u003eFeature: Brand: AEM Induction\u003cbr\u003eFeature: Part Number: AEM-28-20181\u003cbr\u003eFeature: Product Type: DryFlow replacement air filter element\u003cbr\u003eFeature: Filter Style: Panel\u003cbr\u003eFeature: Filter Media: Reusable synthetic, dry media\u003cbr\u003eFeature: Color: Red\u003cbr\u003eFeature: Application: Select Mercedes vehicles\u003cbr\u003eFeature: Maintenance: Washable and reusable; no filter oil required\u003cbr\u003eFeature: Quantity: One air filter element\u003cbr\u003eThe AEM Induction AEM-28-20181 offers a practical upgrade or replacement for drivers seeking durable, low-maintenance filtration. Confirm vehicle compatibility before ordering to ensure the filter matches the original airbox and application requirements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction DryFlow replacement air filter for select Mercedes applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable synthetic dry media helps capture dirt and intake debris\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eWashable design requires no filter oil for routine maintenance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePanel-style construction supports a secure factory airbox fit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDurable red filter media is designed for long service life\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupplied as one air filter element\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644674867452,"sku":"AIP28-20181","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20181_cf3615be-33c8-4451-b304-b2a8eeff4f75.jpg?v=1791112504"},{"product_id":"aem-induction-dryflow-air-filter-aem-28-20129-for-1999-2016-gm-full-size-suvs-and-trucks","title":"AEM Induction DryFlow Air Filter AEM-28-20129 for 1999–2016 GM Full-Size SUVs and Trucks","description":"DryFlow Air Filter 99- GM P\/U 4.3\/4.8\/5.3\/6.0L\n\u003cp\u003eImprove air filtration performance with the AEM Induction DryFlow air filter, part number AEM-28-20129. Designed for select 1999–2016 GM full-size SUVs and trucks equipped with 4.3L, 4.8L, 5.3L, or 6.0L engines, this replacement panel filter provides dependable protection against dirt, dust, and other airborne contaminants. Its application-specific design supports a precise fit in the factory airbox for straightforward installation and reliable service.\u003cbr\u003eThe DryFlow filter media uses a synthetic, oil-free construction that helps simplify maintenance while delivering efficient airflow and filtration. The reusable design can be cleaned and serviced as needed, making it a practical alternative to disposable replacement filters. A durable red filter element and rigid panel construction are engineered for consistent performance in daily driving, towing, and other demanding conditions.\u003cbr\u003eFeature: Brand — AEM Induction\u003cbr\u003eFeature: Part Number — AEM-28-20129\u003cbr\u003eFeature: Filter Type — DryFlow synthetic panel air filter\u003cbr\u003eFeature: Construction — Reusable, oil-free filter media\u003cbr\u003eFeature: Color — Red\u003cbr\u003eFeature: Vehicle Fitment — Select 1999–2016 GM full-size SUVs and trucks\u003cbr\u003eFeature: Engine Compatibility — Select 4.3L, 4.8L, 5.3L, and 6.0L applications\u003cbr\u003eFeature: Installation — Direct replacement for the factory air filter\u003cbr\u003eThis AEM Induction DryFlow air filter is built for drivers seeking dependable filtration without the upkeep associated with oiled filter elements. Confirm vehicle and engine compatibility before ordering to ensure the AEM-28-20129 is the correct replacement for your application.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: AEM-28-20129\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: DryFlow synthetic panel air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Reusable, oil-free filter media\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor: Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Select 1999–2016 GM full-size SUVs and trucks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEngine Compatibility: Select 4.3L, 4.8L, 5.3L, and 6.0L applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Direct replacement for the factory air filter\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644675227900,"sku":"AIP28-20129","price":50.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20129_12227375-6aff-444c-8013-6812a08b6960.jpg?v=1791112533"},{"product_id":"aem-induction-dryflow-air-filter-element-aem-28-20031-for-nissan-and-infiniti","title":"AEM Induction Dryflow Air Filter Element AEM-28-20031 for Nissan and Infiniti","description":"DryFlow Air Filter 81-    Nissan 3.5L\n\u003cp\u003eUpgrade your vehicle’s air intake system with the AEM Induction Dryflow air filter element, part number AEM-28-20031. Designed as a direct-fit replacement for select Nissan and Infiniti applications, this panel-style filter helps provide dependable airflow while protecting the engine from dirt and airborne contaminants. Its synthetic filter media is engineered for efficient filtration and long-term service performance.\u003cbr\u003eThe reusable Dryflow design eliminates the need for oiling, helping simplify maintenance and reduce the mess associated with traditional oiled filters. The red filter media provides a distinctive appearance under the hood, while the precision-fit construction helps ensure proper placement within the factory airbox. This air filter is sold individually and is suitable for drivers seeking a reliable replacement or performance-oriented upgrade.\u003cbr\u003eFeature: Brand — AEM Induction\u003cbr\u003eFeature: Part Number — AEM-28-20031\u003cbr\u003eFeature: Filter Type — Dryflow panel air filter element\u003cbr\u003eFeature: Filter Media — Synthetic, oil-free construction\u003cbr\u003eFeature: Application — Select Nissan and Infiniti vehicles\u003cbr\u003eFeature: Color — Red\u003cbr\u003eFeature: Serviceability — Reusable and washable design\u003cbr\u003eFeature: Installation — Direct-fit replacement for the original air filter element\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand — AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number — AEM-28-20031\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type — Dryflow panel air filter element\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media — Synthetic, oil-free construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication — Select Nissan and Infiniti vehicles\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eColor — Red\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eServiceability — Reusable and washable design\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation — Direct-fit replacement for the original air filter element\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644675653884,"sku":"AIP28-20031","price":50.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP28-20031_20a46788-8dbf-4ae8-b348-fd458c8d3954.jpg?v=1791112560"},{"product_id":"aem-induction-21-891c-cold-air-intake-system-for-2022-2023-subaru-wrx","title":"AEM Induction 21-891C Cold Air Intake System for 2022-2023 Subaru WRX","description":"\u003cp\u003eUpgrade your 2022-2023 Subaru WRX with the AEM Induction 21-891C Cold Air Intake System, engineered to improve airflow to the engine while maintaining a clean, factory-inspired installation. This complete intake kit features a durable aluminum tube with a gray powder-coated finish and an AEM Dryflow reusable air filter designed to provide reliable filtration without the need for filter oil.\u003cbr\u003eThe AEM Induction 21-891C intake system is designed specifically for the Subaru WRX, helping reduce intake restriction and support consistent engine performance. Its smooth aluminum intake tube promotes efficient airflow, while the reusable Dryflow filter can be cleaned and serviced for long-term use. The gray powder coat adds protection against corrosion and wear while providing a refined appearance under the hood.\u003cbr\u003eInstallation is straightforward for enthusiasts and professional technicians using common hand tools. The vehicle-specific design helps ensure proper fitment and compatibility with the original engine configuration. This AEM Induction cold air intake system is an ideal upgrade for drivers seeking improved intake efficiency, dependable filtration, and a durable replacement for the factory airbox and intake components. Confirm vehicle application before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-891C\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2022-2023 Subaru WRX\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSystem Type: Cold air intake system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable Dryflow dry filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntake Material: Aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder coat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Vehicle-specific kit for efficient airflow\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable, reusable filter requires no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Designed for straightforward installation with common hand tools\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644675948796,"sku":"AIP21-891C","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-891C_7b37480f-9cb1-4956-a6e0-776c6fc1666c.jpg?v=1791112584"},{"product_id":"aem-induction-21-873c-air-induction-system-for-2019-2022-hyundai-veloster","title":"AEM Induction 21-873C Air Induction System for 2019-2022 Hyundai Veloster","description":"Cold Air Intake System\n\u003cp\u003eUpgrade the air intake performance of your 2019-2022 Hyundai Veloster with the AEM Induction 21-873C Air Induction System. This vehicle-specific intake kit is engineered to improve airflow to the engine while replacing restrictive factory intake components with a streamlined system designed for performance-focused driving. Its aluminum construction features a durable gray powder-coated finish for a clean appearance and lasting protection under the hood.\u003cbr\u003eThe AEM Induction 21-873C system includes a reusable Dryflow air filter that provides efficient filtration without requiring filter oil. The washable design supports convenient long-term maintenance and helps reduce replacement filter waste. By promoting smoother, less restricted airflow, the system can support improved throttle response and consistent engine breathing when paired with the Veloster’s original engine calibration.\u003cbr\u003eDesigned for a direct-fit installation, this complete kit is tailored to the factory configuration of select 2019-2022 Hyundai Veloster models. The aluminum intake tube and included components provide a secure, organized fit while maintaining a professional appearance. Verify vehicle application before installation to ensure compatibility with your specific Veloster configuration. The AEM Induction part number 21-873C identifies the complete intake system and its included Dryflow filtration components.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for select 2019-2022 Hyundai Veloster models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntake Type: Cold air induction system designed to improve airflow to the engine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Media: Reusable Dryflow dry air filter requiring no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Aluminum intake components for strength and dependable service\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder-coated finish for durability and a clean under-hood appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Vehicle-specific kit designed for a direct-fit replacement of factory intake components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-873C\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644676538620,"sku":"AIP21-873C","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-873C_9f94071d-c842-4a5f-8b06-969b3dd0a37b.jpg?v=1791112620"},{"product_id":"aem-induction-21-872c-cold-air-intake-system-for-2019-2021-hyundai-veloster","title":"AEM Induction 21-872C Cold Air Intake System for 2019–2021 Hyundai Veloster","description":"\u003cp\u003eUpgrade your 2019–2021 Hyundai Veloster with the AEM Induction 21-872C Cold Air Intake System, engineered to improve airflow to the engine while maintaining a clean, purposeful appearance under the hood. This complete intake kit features a reusable Dryflow air filter and an aluminum intake design finished with a durable gray powder coat. The system is designed as a direct-fit solution for compatible Veloster applications, helping streamline installation without unnecessary modifications.\u003cbr\u003eAEM Induction’s Dryflow filter provides dependable air filtration without requiring filter oil, making routine maintenance simple and convenient. The reusable construction supports long-term use, while the aluminum intake tube is built to withstand the demands of daily driving and performance-oriented use. The gray powder-coated finish adds corrosion resistance and complements the factory engine bay.\u003cbr\u003eThe AEM Induction 21-872C intake system is intended for enthusiasts seeking a practical upgrade in engine air management and a more refined intake appearance. Its vehicle-specific configuration helps ensure proper fitment for the specified Hyundai Veloster model years. Review vehicle application details and local emissions requirements before installation, as this product may not be legal for sale or use in all states or applications.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for 2019–2021 Hyundai Veloster applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAir Filter: Reusable Dryflow filter operates without filter oil for simplified maintenance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntake Material: Aluminum construction supports durable, consistent airflow performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder-coated surface provides a clean appearance and added protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Complete cold air intake system kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInstallation: Vehicle-specific design helps support a straightforward installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication Note: Check local emissions regulations and vehicle compatibility before purchase\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644676997372,"sku":"AIP21-872C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-872C_c782d5a8-0333-4ea2-9e3a-09e71b128b74.jpg?v=1791112648"},{"product_id":"aem-induction-21-867c-dryflow-cold-air-intake-system-for-kia-stinger-and-genesis-g70","title":"AEM Induction 21-867C Dryflow Cold Air Intake System for Kia Stinger and Genesis G70","description":"Cold Air Intake System\n\u003cp\u003eUpgrade the intake performance of your compatible vehicle with the AEM Induction 21-867C Air Induction System. Designed for the Kia Stinger model years 2018 through 2020 and Genesis G70 model years 2019 through 2023, this cold air intake system is engineered to improve airflow to the engine while maintaining a clean, dependable installation. The kit includes an aluminum intake system with a durable gray powder-coat finish and a reusable Dryflow air filter.\u003cbr\u003eThe reusable Dryflow filter is designed to provide efficient air filtration without requiring filter oil, helping simplify maintenance and reduce long-term replacement needs. Its washable construction supports repeated use, while the intake tubing is built to promote smooth airflow from the filter to the engine. The gray powder-coated aluminum construction delivers durability and a clean appearance suited to the engine bay.\u003cbr\u003eThe AEM Induction 21-867C kit is intended as a direct-fit-style upgrade for select Kia Stinger and Genesis G70 applications. It is supplied as a complete air induction system for streamlined installation and is not classified as air restricted. Confirm vehicle fitment before ordering, including the exact model year and engine configuration, to ensure compatibility. Professional installation is recommended for best results.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-867C\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Kia Stinger, 2018–2020; Genesis G70, 2019–2023\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSystem Type: Cold air intake and air induction system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable Dryflow dry filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Aluminum intake construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder coat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable, reusable filter does not require oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFitment: Designed for select vehicle applications; verify engine configuration before installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRegulatory Status: Not classified as air restricted\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644677390588,"sku":"AIP21-867C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-867C_1a65a98e-44f3-49ef-9d0d-360d7065deed.jpg?v=1791112676"},{"product_id":"aem-induction-21-862c-cold-air-intake-system-for-2019-2021-volkswagen-jetta","title":"AEM Induction 21-862C Cold Air Intake System for 2019-2021 Volkswagen Jetta","description":"\u003cp\u003eImprove the air intake performance of your 2019-2021 Volkswagen Jetta with the AEM Induction 21-862C Cold Air Intake System. This complete intake kit is designed to replace restrictive factory intake components with a smoother-flowing aluminum intake tube and a reusable Dryflow air filter. The system supports improved airflow to the engine while maintaining a clean, purposeful appearance under the hood.\u003cbr\u003eThe aluminum intake construction features a durable gray powder-coat finish that resists wear and complements the engine compartment. The included Dryflow filter is washable and reusable, helping reduce the need for frequent replacement filters when properly maintained. Its dry media design requires no filter oil, making routine cleaning and service straightforward for everyday vehicle use.\u003cbr\u003eThe AEM Induction part number 21-862C is engineered for compatibility with Volkswagen Jetta models from 2019 through 2021. This application-specific kit is designed for a direct-fit installation using the included components and factory mounting locations, helping simplify installation for automotive enthusiasts and professional installers. Verify vehicle application before ordering to ensure proper fitment.\u003cbr\u003eBuilt for drivers seeking dependable intake performance and reusable filtration, the AEM Induction 21-862C combines durable aluminum construction, a gray powder-coat finish, and Dryflow filter technology in one practical upgrade. The kit is not air restricted and is suitable for standard shipping arrangements.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-862C\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Cold air intake system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: 2019-2021 Volkswagen Jetta\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable Dryflow dry air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Aluminum intake construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder coat\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Direct-fit intake kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAir Restricted: No\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644677947644,"sku":"AIP21-862C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-862C_acb7ae9e-0700-43fe-a9eb-0835abd96b6b.jpg?v=1791112703"},{"product_id":"aem-induction-21-858c-cold-air-intake-system-for-kia-forte-and-hyundai-elantra","title":"AEM Induction 21-858C Cold Air Intake System for Kia Forte and Hyundai Elantra","description":"\u003cp\u003eImprove airflow to your engine with the AEM Induction 21-858C Cold Air Intake System. Designed for select Kia Forte models from 2019 through 2024 and Hyundai Elantra models from 2020, this complete intake kit replaces the restrictive factory airbox and intake tubing with a streamlined system engineered for efficient air delivery. Its application-specific design supports a clean installation while complementing the vehicle’s original engine layout.\u003cbr\u003eThe system includes an AEM Dryflow reusable air filter that captures contaminants without requiring filter oil. The durable aluminum intake tube features a gray powder-coated finish for corrosion resistance and a clean under-hood appearance. The reusable filter can be cleaned and returned to service, helping reduce the need for frequent disposable filter replacements while maintaining consistent filtration performance.\u003cbr\u003eFeature: Brand: AEM Induction\u003cbr\u003eFeature: Part Number: 21-858C\u003cbr\u003eFeature: Product Type: Cold air intake system\u003cbr\u003eFeature: Filter Type: Reusable Dryflow dry filter\u003cbr\u003eFeature: Intake Material: Aluminum\u003cbr\u003eFeature: Finish: Gray powder coat\u003cbr\u003eFeature: Vehicle Applications: Kia Forte 2019-2024 and Hyundai Elantra 2020\u003cbr\u003eFeature: Installation: Application-specific kit designed for straightforward replacement of the factory intake system\u003cbr\u003eFeature: California Status: State-restricted application; verify emissions compliance before purchase or installation\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction 21-858C cold air intake system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable Dryflow dry air filter requires no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAluminum intake tube with durable gray powder-coated finish\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select Kia Forte models from 2019 through 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned for select 2020 Hyundai Elantra models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication-specific replacement for the factory intake system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia-restricted application; verify emissions compliance before installation\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644678111484,"sku":"AIP21-858C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-858C_bce7d0fe-af7c-4727-b653-22c544b02d31.jpg?v=1791112726"},{"product_id":"aem-induction-21-855c-cold-air-intake-system-with-dryflow-reusable-filter-for-2018-2024-toyota-camry","title":"AEM Induction 21-855C Cold Air Intake System with Dryflow Reusable Filter for 2018-2024 Toyota Camry","description":"\u003cp\u003eUpgrade your 2018-2024 Toyota Camry with the AEM Induction 21-855C Cold Air Intake System. This performance air induction kit is designed to improve airflow to the engine while replacing the restrictive factory intake components. Its application-specific design supports a precise fit and streamlined installation, making it a practical choice for drivers seeking enhanced intake performance and a refined engine bay appearance.\u003cbr\u003eThe system includes an AEM Dryflow reusable air filter that provides efficient filtration without requiring filter oil. The dry filter media is washable and reusable, helping simplify routine maintenance while supporting consistent airflow over time. The intake components are constructed from aluminum and finished with a gray powder coat for added durability and a clean, understated appearance.\u003cbr\u003eDesigned specifically for compatible Toyota Camry applications from 2018 through 2024, the AEM Induction 21-855C provides a dependable fit and professional-quality construction. The kit is not air restricted and is not designated for truck freight. Please verify vehicle compatibility and applicable emissions requirements before installation, as this product is state restricted in California. Follow the included installation instructions and retain the factory components for future service needs.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for compatible 2018-2024 Toyota Camry models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: AEM Dryflow reusable dry air filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Durable aluminum intake components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder-coat finish for a clean, corrosion-resistant surface\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Washable, reusable filter does not require filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Helps reduce intake restriction and improve airflow to the engine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: Vehicle-specific kit designed for a straightforward installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRegulatory Note: State restricted in California; verify applicable emissions requirements before purchase\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644678897916,"sku":"AIP21-855C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-855C_c3d76063-955d-45fd-bc47-61f4df286c07.jpg?v=1791112754"},{"product_id":"aem-induction-21-854c-cold-air-intake-system-with-dryflow-filter-for-2018-2022-honda-accord","title":"AEM Induction 21-854C Cold Air Intake System with Dryflow Filter for 2018-2022 Honda Accord","description":"\u003cp\u003eUpgrade your 2018-2022 Honda Accord with the AEM Induction 21-854C Cold Air Intake System, engineered to improve airflow to the engine while maintaining dependable daily-driving performance. This complete intake kit replaces restrictive factory intake components with a streamlined air path designed to support stronger throttle response and increased air volume.\u003c\/p\u003e\n\u003cp\u003eThe system includes an AEM Dryflow reusable air filter that provides efficient filtration without requiring filter oil. Its washable, reusable design helps reduce long-term maintenance costs while protecting the engine from common airborne contaminants. The aluminum intake tube features a durable gray powder-coat finish that resists wear and provides a clean, performance-oriented appearance under the hood.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for compatible 2018-2022 Honda Accord applications, the AEM Induction 21-854C kit is engineered for a straightforward installation using the included components and factory mounting locations where applicable. The precision-fit design helps ensure reliable connections and a secure fit, making it a practical upgrade for drivers seeking improved intake performance without sacrificing everyday usability.\u003c\/p\u003e\n\u003cp\u003eFeature: Cold air intake system designed for compatible 2018-2022 Honda Accord models.\nFeature: AEM Dryflow reusable filter provides effective filtration without filter oil.\nFeature: Aluminum intake tube supports smooth airflow and durable performance.\nFeature: Gray powder-coat finish delivers a clean, corrosion-resistant appearance.\nFeature: Complete kit supports a direct, vehicle-specific installation.\nFeature: Part number AEM-21-854C for accurate product identification.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCold air intake system designed for compatible 2018-2022 Honda Accord models\u003c\/li\u003e\n\u003cli\u003eAEM Dryflow reusable filter provides effective filtration without filter oil\u003c\/li\u003e\n\u003cli\u003eAluminum intake tube supports smooth airflow and durable performance\u003c\/li\u003e\n\u003cli\u003eGray powder-coat finish delivers a clean, corrosion-resistant appearance\u003c\/li\u003e\n\u003cli\u003eComplete kit supports a direct, vehicle-specific installation\u003c\/li\u003e\n\u003cli\u003ePart number AEM-21-854C for accurate product identification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644679225596,"sku":"AIP21-854C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-854C_558e33ed-9702-4e61-aa17-a6127d4716ef.jpg?v=1791112785"},{"product_id":"aem-induction-21-849ds-air-induction-system-for-kia-stinger-and-genesis-g70","title":"AEM Induction 21-849DS Air Induction System for Kia Stinger and Genesis G70","description":"Cold Air Intake System\n\u003cp\u003eUpgrade your vehicle’s intake performance with the AEM Induction 21-849DS Air Induction System. Designed for the 2020–2023 Kia Stinger and 2024 Genesis G70, this complete cold air intake kit replaces restrictive factory intake components with a streamlined system engineered for improved airflow. Its precision-fit design helps support consistent engine performance while maintaining a clean, original-equipment-inspired appearance under the hood.\u003cbr\u003eThe AEM Induction 21-849DS features AEM’s Dryflow reusable air filter, which provides effective filtration without requiring filter oil. The dry filter design simplifies maintenance and can be cleaned and reused over time, making it a practical choice for drivers seeking long-term performance and convenience. A durable black plastic intake construction helps withstand everyday engine-bay conditions while supporting reliable service.\u003cbr\u003eThis kit is designed as a direct-fit intake solution for compatible Kia and Genesis applications, helping simplify installation without extensive modifications. Before ordering, verify vehicle year, model, engine configuration, and application details to ensure proper fitment. Professional installation is recommended for best results.\u003cbr\u003eThe AEM Induction 21-849DS is not classified as air restricted, but it is state restricted in California. Review applicable emissions regulations and confirm compliance before installation or use in your area.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-849DS\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eProduct Type: Air induction system\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication: 2020–2023 Kia Stinger and 2024 Genesis G70\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable Dryflow dry filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstruction: Durable black plastic intake components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Vehicle-specific direct-fit intake kit\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Reusable filter does not require filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRegulatory Information: State restricted in California\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644679684348,"sku":"AIP21-849DS","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-849DS_103fb706-1fcb-4622-8c50-07d41cb93a1c.jpg?v=1791112813"},{"product_id":"aem-induction-21-846c-cold-air-intake-system-with-dryflow-filter-for-subaru-impreza-and-crosstrek","title":"AEM Induction 21-846C Cold Air Intake System with Dryflow Filter for Subaru Impreza and Crosstrek","description":"\u003cp\u003eUpgrade your Subaru’s air intake performance with the AEM Induction 21-846C Cold Air Intake System. Designed for Subaru Impreza models from 2017 through 2024 and Subaru Crosstrek models from 2018 through 2024, this complete intake kit helps replace restrictive factory intake components with a smoother, more efficient airflow path. The system is engineered for drivers seeking responsive performance, consistent airflow, and dependable fitment without sacrificing everyday usability.\u003cbr\u003eThe AEM 21-846C features a reusable Dryflow synthetic air filter that provides effective filtration without requiring filter oil. Its maintenance-friendly design allows the filter to be cleaned and reused, helping reduce long-term replacement needs. The aluminum intake tube is finished with a durable gray powder coat that provides a clean appearance and added resistance to wear under the hood. Each component is designed to work together as a vehicle-specific air induction system for straightforward installation and reliable operation.\u003cbr\u003eThis cold air intake kit is built for Subaru enthusiasts who want a practical performance upgrade backed by AEM Induction engineering. The vehicle-specific configuration helps preserve proper fitment around factory components, while the reusable filter supports convenient service intervals. The AEM Induction 21-846C is not air restricted and is not designated for truck-freight-only shipping. It is state restricted in California, so verify local emissions requirements and application eligibility before installation.\u003cbr\u003eCompatible applications include Subaru Impreza models from 2017-2024 and Subaru Crosstrek models from 2018-2024. Confirm your vehicle’s exact year, engine configuration, and emissions requirements before ordering to ensure proper compatibility.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle Fitment: Designed for Subaru Impreza models from 2017-2024 and Subaru Crosstrek models from 2018-2024\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAir Filter: Reusable Dryflow synthetic filter requiring no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIntake Material: Aluminum construction for a lightweight, durable airflow path\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder-coated intake tube for a clean, protective surface\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance Design: Helps improve airflow compared with restrictive factory intake components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaintenance: Cleanable and reusable filter helps reduce ongoing replacement requirements\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCalifornia Status: State restricted in California; verify emissions compliance before purchase\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eShipping Classification: Not restricted to truck-freight-only shipping\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644680241404,"sku":"AIP21-846C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-846C_6a521252-b6f0-4b10-b254-baa3bd1b47b7.jpg?v=1791112840"},{"product_id":"aem-induction-21-827c-cold-air-intake-system-with-dryflow-reusable-filter-for-2018-2024-lexus-and-toyota","title":"AEM Induction 21-827C Cold Air Intake System with Dryflow Reusable Filter for 2018-2024 Lexus and Toyota","description":"\u003cp\u003eUpgrade your vehicle’s air intake performance with the AEM Induction 21-827C Cold Air Intake System. Designed for select 2018-2024 Lexus and Toyota applications, this complete intake kit helps improve airflow to the engine while providing a durable, vehicle-specific fit. Its streamlined design replaces restrictive factory intake components with a high-flow system engineered for dependable performance.\u003c\/p\u003e\n\u003cp\u003eThe included Dryflow reusable air filter is built for long-term use and does not require filter oil, simplifying maintenance while helping protect the engine from airborne contaminants. The aluminum intake construction features a gray powder-coated finish that delivers corrosion resistance and a clean, understated appearance under the hood. Each component is designed to work together as a cohesive system for consistent airflow and reliable operation.\u003c\/p\u003e\n\u003cp\u003eThe AEM Induction 21-827C is a practical choice for drivers seeking improved intake efficiency without sacrificing everyday usability. The reusable filter can be cleaned and serviced as needed, helping reduce replacement filter waste over the life of the system. Before installation, verify vehicle compatibility and application requirements to ensure proper fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Select 2018-2024 Lexus and Toyota vehicles\u003cbr\u003e\u003cstrong\u003eFilter Type:\u003c\/strong\u003e Dryflow reusable air filter\u003cbr\u003e\u003cstrong\u003eIntake Material:\u003c\/strong\u003e Aluminum\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Gray powder coat\u003cbr\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e AEM Induction\u003cbr\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 21-827C\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific cold air intake system for select 2018-2024 Lexus and Toyota applications\u003c\/li\u003e\n\u003cli\u003eDryflow reusable air filter provides convenient, oil-free maintenance\u003c\/li\u003e\n\u003cli\u003eAluminum intake construction supports durability and efficient airflow\u003c\/li\u003e\n\u003cli\u003eGray powder-coated finish helps resist corrosion and complements the engine compartment\u003c\/li\u003e\n\u003cli\u003eComplete intake kit designed as a replacement for restrictive factory components\u003c\/li\u003e\n\u003cli\u003eReusable filter helps reduce the need for frequent replacement filters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644680438012,"sku":"AIP21-827C","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-827C_c0330eb9-eb36-451a-8421-55c83144f0e3.jpg?v=1791112866"},{"product_id":"aem-induction-21-823ds-cold-air-intake-system-for-infiniti-m37-and-q70","title":"AEM Induction 21-823DS Cold Air Intake System for Infiniti M37 and Q70","description":"\u003cp\u003eUpgrade your Infiniti’s intake performance with the AEM Induction 21-823DS Cold Air Intake System. Designed for the Infiniti M37 model years 2011–2013 and Infiniti Q70 model years 2014–2017, this complete intake kit helps streamline airflow to the engine while providing a clean, factory-inspired installation. The system is finished in black plastic for a durable appearance and dependable service under the hood.\u003cbr\u003eThe AEM Induction 21-823DS features a Dryflow reusable dry air filter that captures incoming contaminants without requiring filter oil. Its washable, reusable design supports convenient maintenance and long-term use, making it a practical upgrade for drivers who want improved intake efficiency without repeatedly replacing disposable filters. The enclosed intake design also helps position the filter away from warmer engine-bay air, supporting a consistent supply of cooler air to the engine.\u003cbr\u003eFeature: AEM Induction 21-823DS cold air intake system designed for select Infiniti M37 and Q70 applications. Feature: Includes a reusable Dryflow dry air filter for straightforward maintenance without filter oil. Feature: Black plastic intake construction offers a durable, clean appearance and reliable under-hood performance. Feature: Complete kit configuration is designed for a direct-fit style installation on compatible vehicles. Feature: Helps improve intake airflow and supports responsive engine operation.\u003cbr\u003eBefore installation, verify vehicle fitment and confirm that all included components match the application. Professional installation is recommended for the best results. The AEM Induction 21-823DS combines reusable filtration, vehicle-specific design, and efficient airflow management in a purpose-built intake system for compatible Infiniti vehicles.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAEM Induction 21-823DS cold air intake system for select Infiniti M37 and Q70 applications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable Dryflow dry air filter requires no filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBlack plastic intake construction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVehicle-specific kit designed for a direct-fit style installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports improved intake airflow and responsive engine operation\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644681060604,"sku":"AIP21-823DS","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-823DS_435ffb0a-0053-47b0-9ecb-820e3ad5a9a8.jpg?v=1791112899"},{"product_id":"aem-induction-21-821ds-dryflow-cold-air-intake-system-for-2009-2020-nissan-z","title":"AEM Induction 21-821DS DryFlow Cold Air Intake System for 2009-2020 Nissan Z","description":"\u003cp\u003eImprove the air delivery of your 2009-2020 Nissan Z with the AEM Induction 21-821DS Cold Air Intake System. This engineered air induction kit is designed to replace restrictive factory intake components and provide a more direct path for cooler, denser air to the engine. The result is responsive performance and consistent airflow for drivers seeking a practical upgrade to their Nissan Z.\u003c\/p\u003e\n\u003cp\u003eThe system includes a reusable DryFlow air filter that captures contaminants without requiring filter oil. Its dry media simplifies routine maintenance and supports dependable filtration during everyday driving. The filter is paired with a durable black plastic intake assembly designed for a clean fit and streamlined appearance in the engine compartment.\u003c\/p\u003e\n\u003cp\u003eBuilt as a complete kit, the AEM Induction 21-821DS helps simplify installation while retaining a factory-style level of usability. The intake system is suitable for Nissan Z applications from 2009 through 2020 and is intended for enthusiasts who want improved intake airflow without sacrificing convenience. The reusable filter can be cleaned and serviced over time, making this system a long-term performance solution.\u003c\/p\u003e\n\u003cp\u003eFeature: Cold air intake system designed for 2009-2020 Nissan Z models\u003cbr\u003eFeature: AEM Induction part number 21-821DS\u003cbr\u003eFeature: Reusable DryFlow dry air filter\u003cbr\u003eFeature: Durable black plastic intake construction\u003cbr\u003eFeature: Designed to support improved airflow and responsive engine performance\u003cbr\u003eFeature: Serviceable filter design for long-term use\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCold air intake system designed for 2009-2020 Nissan Z models\u003c\/li\u003e\n\u003cli\u003eAEM Induction part number 21-821DS\u003c\/li\u003e\n\u003cli\u003eReusable DryFlow dry air filter\u003c\/li\u003e\n\u003cli\u003eDurable black plastic intake construction\u003c\/li\u003e\n\u003cli\u003eDesigned to support improved airflow and responsive engine performance\u003c\/li\u003e\n\u003cli\u003eServiceable filter design for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644681355516,"sku":"AIP21-821DS","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-821DS_6527e78a-82f2-469b-8a93-786fac75639b.jpg?v=1791112926"},{"product_id":"aem-induction-21-795c-air-induction-system-for-honda-pilot-ridgeline-and-passport","title":"AEM Induction 21-795C Air Induction System for Honda Pilot, Ridgeline and Passport","description":"Cold Air Intake System\n\u003cp\u003eUpgrade your vehicle’s air intake performance with the AEM Induction 21-795C Air Induction System. Designed for select Honda Pilot, Ridgeline, and Passport applications, this complete intake kit helps streamline airflow to the engine while replacing restrictive factory intake components. Its carefully engineered design supports improved throttle response and consistent performance for daily driving, towing, and other demanding conditions.\u003cbr\u003eThe system features AEM’s Dryflow reusable dry air filter, which provides effective filtration without requiring filter oil. The washable filter is designed for long-term use and simplified maintenance, making it a practical choice for drivers who want dependable protection and reduced replacement-filter waste. The intake components are constructed from aluminum and finished with a durable gray powder coat for corrosion resistance and a clean, understated appearance in the engine compartment.\u003cbr\u003eThe AEM Induction 21-795C is engineered for a direct-fit installation on compatible vehicles, helping simplify the upgrade process without major modifications. It is suitable for Honda Pilot models from 2016 through 2022, Honda Ridgeline models from 2017 through 2025, and Honda Passport models from 2019 through 2024. Verify vehicle fitment before ordering to ensure compatibility with your specific application. This kit is not air restricted and is not designated for truck freight shipping.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eApplication: Fits select Honda Pilot models from 2016-2022, Honda Ridgeline models from 2017-2025, and Honda Passport models from 2019-2024\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFilter Type: Reusable AEM Dryflow dry air filter provides washable, oil-free filtration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMaterial: Aluminum intake construction supports durable performance and efficient airflow\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFinish: Gray powder coat helps resist corrosion and provides a clean appearance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesign: Direct-fit air induction system is engineered for simplified installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePerformance: Helps reduce intake restriction and support improved throttle response\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBrand: AEM Induction\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart Number: 21-795C\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644681847036,"sku":"AIP21-795C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-795C_266ed941-a435-4c0c-a39b-d6d28083f42c.jpg?v=1791112957"},{"product_id":"aem-induction-21-792c-cold-air-intake-system-for-2016-2022-honda-civic","title":"AEM Induction 21-792C Cold Air Intake System for 2016-2022 Honda Civic","description":"\u003cp\u003eImprove the airflow to your engine with the AEM Induction 21-792C Cold Air Intake System, engineered for select 2016-2022 Honda Civic applications. This complete air induction kit is designed to replace the restrictive factory intake system with a smoother-flowing configuration that supports responsive engine performance and efficient air delivery. Its cold air design draws cooler air into the engine, helping create a consistent supply of dense intake air for everyday driving and performance-focused use.\u003cbr\u003eThe AEM Induction 21-792C features a reusable dry air filter with a red finish. Unlike an oiled filter, the dry filter design does not require oil during servicing, making routine maintenance straightforward. The reusable element can be cleaned and serviced as needed, providing a practical long-term alternative to disposable replacement filters while helping maintain dependable filtration and airflow.\u003cbr\u003eThis Honda Civic intake kit is designed as a vehicle-specific solution for a clean installation and reliable fitment when matched to the appropriate application. The components are built to support improved intake efficiency without requiring a universal-style setup. AEM Induction combines functional intake design with durable construction to provide a dependable upgrade for drivers seeking sharper throttle response and a more engaging driving experience.\u003cbr\u003eThe AEM Induction 21-792C Cold Air Intake System is not air restricted and is not classified as truck-freight-only. It is state restricted in California, so customers should verify applicable emissions requirements and vehicle compatibility before installation. Always confirm fitment for the exact Honda Civic model, engine, and model year before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVehicle-specific cold air intake system for select 2016-2022 Honda Civic models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReusable dry air filter supports long-term serviceability without filter oil\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eRed filter element provides a distinctive appearance under the hood\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCold air design helps deliver cooler, denser intake air to the engine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to improve intake airflow and support responsive engine performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eComplete intake kit engineered for a clean, application-specific installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNot air restricted and not classified as truck-freight-only\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eState restricted in California; verify applicable emissions compliance before purchase\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM INDUCTION","offers":[{"title":"Default Title","offer_id":67644682666236,"sku":"AIP21-792C","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/8797\/5420\/files\/AIP21-792C_12d531e3-fa3c-4ff6-8e94-218c38716f75.jpg?v=1791112997"}],"url":"https:\/\/ozkonickustomz.com\/collections\/aem-induction.oembed?page=3","provider":"Ozkonic Kustomz LLC","version":"1.0","type":"link"}